PCI TriManual-Intro - Sonnet Technologies

PCI TriManual-Chapters 1-13 3/30/01 5:55 PM Page 15
En
Install Crescendo/PCI Processor
Upgrade Card
1. Remove the Crescendo card from the antistatic
package, making sure to handle the card
by the edges (Figure 8). Your card may differ
from what is pictured below.
2. Align the Crescendo between the inner card
guides of the case and directly over the
Processor Card Slot (Figure 9). Gently press
down until the card is firmly seated in the
Processor Card Slot, taking care not to wiggle
the board as you install it into the slot.
Crescendo card
Figure 8; Figura 8
Crescendo card
anti-static
package
3. Package the processor card you removed earlier
from the computer into the Crescendo’s antistatic
package and store it in a safe place.
Close Computer
1. Raise the support latch (Figure 10) and lock it
into place under the internal assembly.
Processor Card Slot
Figure 9; Figura 9
2. Rotate the internal assembly into the
computer’s case (Figure 11).
support latch
Figure 10; Figura 10
internal
assembly
1-7
Figure 11; Figura 11