Pioneer KRL-32V - User manual - allemand, anglais, espagnol, français, italien, néerlandais, russe

Basic adjustment
Analogue channel settings
Setup
Programme Setup
Analogue Setting
You can reconfigure the analogue TV channels settings
automatically or manually.
E Additional Search
Use this menu to add new channels automatically after
auto installation has been made.
• Start searching channels after selecting the colour system
and sound system.
E Manual Adjust
Use this menu to set up analogue TV channels
manually.
After selecting “Yes” on the screen, press a/b/
c/d to select the channel you want to set and
then press ENTER.
Fine
You can adjust the frequency to the desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0–9 numeric buttons.
EXAMPLE
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
Colour sys.
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”).
Sound sys. (Broadcasting systems)
Select the optimum sound systems (Broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its Network Name, the
“Auto Installation” detects the information and assigns
a name to it. However, you can change channel names
individually.
1 Press a/b/c/d to select each character of
the new name for the channel, and then press
ENTER.
2 Repeat step 1 above until the name is fully spelt
out.
Skip
Channels with “Skip” set to “On” are passed over
when using Pk/l even if selected while watching the
image from the TV.
Decoder
When connecting a decoder to the TV, you need to
select “INPUT1” or “INPUT2”.
NOTE
• The factory preset value is “Off”.
Lock
You can block the viewing of any channel.
NOTE
• See “Child Lock” for setting a PIN.
• When “Lock” is set to “On” for a channel, “Child lock has
been activated” displays, and the image and sound of the
channel are blocked.
• When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the
correct PIN unlocks the “Child Lock” temporarily until the
power is turned off.
E Sort
Channel positions can be sorted freely.
1 Press c/d to select “Yes”, and then press
ENTER.
2 Press a/b/c/d to select the channel you
want to move, and then press ENTER.
3 Press a/b/c/d to move it to the desired
position, and then press ENTER.
4 Repeat steps 2 and 3 until all desired channels
are sorted.
E Erase Programme
Channels can be erased individually.
1 Press c/d to select “Yes”, and then press
ENTER.
2 Press a/b/c/d to select the channel you
want to erase, and then press ENTER.
• A message window pops up.
3 Press c/d to select “Yes”, and then press
ENTER to erase the selected channel. All the
subsequent channels move up.
4 Repeat steps 2 and 3 until all desired channels
are erased.
NOTE
• The name can be five characters or less.
• If a channel name is less than five characters, select “END”
to set the channel name.
33