Pioneer KRL-32V - User manual - allemand, anglais, espagnol, français, italien, néerlandais, russe
Pioneer KRL-32V - User manual - allemand, anglais, espagnol, français, italien, néerlandais, russe
Pioneer KRL-32V - User manual - allemand, anglais, espagnol, français, italien, néerlandais, russe
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Appendix<br />
Updating your TV via DVB-T<br />
Ensure that your TV software version is always up to<br />
date. From time to time <strong>Pioneer</strong> will make updated TV<br />
base software and DVB software available.<br />
Digital Setup<br />
Download Setup<br />
Searching for updates*<br />
* All countries except UK and Sweden are set to “No”<br />
for this function.<br />
The TV automatically determines whether a new<br />
software version is available when the TV is in standby<br />
mode.<br />
Item<br />
Yes: Automatically searches for new software updates<br />
available when the TV is in standby mode.<br />
No: Does not search for update information.<br />
Now: Checks if there is new software immediately.<br />
Downloading the software<br />
You can select the method of update.<br />
1 If the software is updated, the confirmation<br />
message “New download information has been<br />
detected.” appears.<br />
• If the TV receives the update service while in standby<br />
mode, a confirmation message displays after turning<br />
on the power.<br />
2 Follow the screen prompts.<br />
Item<br />
Yes: Starts downloading immediately. It takes<br />
approximately one hour to update. You cannot carry<br />
out other operations while downloading.<br />
Cancels the download by pressing ENTER on the<br />
remote control unit when “Discontinue” is displayed on<br />
the screen during the update.<br />
•<br />
No: Starts downloading automatically several minutes<br />
after entering standby mode.<br />
NOTE<br />
• The TV must remain in standby mode for download. Do not<br />
turn off the power using a on the TV.<br />
• Updating the software may take some time.<br />
Information<br />
Message List<br />
When new software is detected, you can confirm the<br />
update information and download the software from<br />
“Message List”.<br />
NOTE<br />
• When the TV succeeds at downloading new software,<br />
the message is updated in the “Message List” of the<br />
“Information” menu.<br />
• The software update will not be carried out if there is no<br />
new software available at the specified download time.<br />
1<br />
2<br />
3<br />
Information<br />
Receiver Report<br />
Display reports regarding failures and changes for<br />
timer settings.<br />
Reset<br />
If complex adjustments are made so that the settings<br />
cannot be restored to normal, you can reset the<br />
settings to the factory preset values.<br />
Setup<br />
Reset<br />
Go to “HOME MENU” > “Setup” > “Reset”.<br />
Press c/d to select “Yes”, and then press<br />
ENTER.<br />
• “Now, TV will restart automatically. OK?” displays on<br />
the screen.<br />
Press c/d to select “Yes”, and then press<br />
ENTER.<br />
• “Now initialising...” displays on the screen and blinks.<br />
• After the reset has completed, the power shuts<br />
off and then comes back on. The screen will have<br />
returned to its original settings.<br />
Identification<br />
Now initialising...<br />
Setup<br />
Identification<br />
You can check the TV ID on the screen for reporting to<br />
customer service.<br />
CLEARING THE PIN<br />
1 Go to “HOME MENU” > “Setup”.<br />
2 Press a/b to select “Auto Installation”,<br />
“Programme Setup”, “Child Lock” or “Reset”,<br />
and then press ENTER. The PIN input window<br />
will display.<br />
3<br />
Press and hold both ik and Pk on the TV<br />
simultaneously until the message appears on<br />
the screen.<br />
44