AW & BVS Seite001 - BJZ Industriedienst und Vertrieb
AW & BVS Seite001 - BJZ Industriedienst und Vertrieb
AW & BVS Seite001 - BJZ Industriedienst und Vertrieb
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
178<br />
Werkzeuge/<br />
tooling<br />
WIHA ESD PROFESSIONAL ZANGEN<br />
Z-40-04<br />
Elektronik-Seitenschneider / electronic cutter<br />
mit schmalem, spitzem Kopf, Kopfbreite: 10 mm<br />
with slim pointed head, head width 10 mm<br />
Länge / length: 115 mm, Verpackungseinheit / packing unit: 5<br />
Best.-Nr.<br />
order-no.<br />
Z-103 6342<br />
Z-40-04-01<br />
Ausführung<br />
type<br />
mit kleiner Wate<br />
with small side face<br />
harter Draht<br />
hard wire<br />
Technische Änderungen vorbehalten / subject to technical changes<br />
Schneidwerte / cutting specs.<br />
mittelharter Draht<br />
half-hard wire<br />
Wiha ESD Professional Zangen sind mit besonders präzisen <strong>und</strong> haltbaren<br />
Schneiden ausgestattet. Für nahezu blendfreie Schneiden sorgt eine Feinpolitur an<br />
den Köpfen. Die Zangen haben ein durchgestecktes Präzisionsgelenk, das eng<br />
schließend, sicher gegen Verdrehung <strong>und</strong> verschleißarm ist. Die Doppelblattfederung<br />
<strong>und</strong> der äußerst ergonomische Zweikomponentengriff sorgen für ein komfortables,<br />
kontrolliertes <strong>und</strong> gefühlvolles Arbeiten. Gemäß DIN EN 61340 sind die Griffe der<br />
6 9<br />
Zangen dissipativ <strong>und</strong> haben einen Oberflächenwiderstand von 10 - 10 Ω.<br />
Wiha ESD Professional pliers are equipped with especially accurate and durable<br />
edges. A fine polish at the heads provides almost non-glare edges. The pliers have a<br />
precision joint, which is wear resistant and safe against twisting. The double sheet<br />
suspension and the extremely ergonomic two-component handles provide a<br />
comfortable, controlled and sensitive working. According to the IEC 61340 the<br />
6 9<br />
handles of the pliers are dissipative and have a surface resistance of 10 - 10 Ω.<br />
Kupfer<br />
copper<br />
0.6 1.0<br />
Elektronik-Seitenschneider / electronic cutter<br />
mit schmalem, spitzem Kopf, Kopfbreite: 10 mm<br />
with slim pointed head, head width 10 mm<br />
Länge / length: 115 mm, Verpackungseinheit / packing unit: 5<br />
Best.-Nr.<br />
order-no.<br />
Z-103 6343<br />
Ausführung<br />
type<br />
fast ohne Wate<br />
almost full flush<br />
ESD-Werkzeuge sind nicht isolierend <strong>und</strong> daher nicht für Arbeiten an<br />
spannungsführenden Teilen geeignet. /<br />
ESD-tools are not insulating and therefore they are not suitable for<br />
operations on voltaged parts.<br />
0.3<br />
harter Draht<br />
hard wire<br />
-<br />
Schneidwerte / cutting specs.<br />
mittelharter Draht<br />
half-hard wire<br />
Kupfer<br />
copper<br />
- 1.0<br />
aa<br />
ss<br />
ee<br />
ll<br />
ll<br />
a a<br />
ss<br />
uu<br />
ii<br />
nn<br />
e<br />
ee e<br />
rr<br />
HH<br />
AA<br />
NN<br />
DD<br />
Z-41-04<br />
Z-41-04-01<br />
<strong>BJZ</strong><br />
WIHA ESD PROFESSIONAL PLIERS<br />
Elektronik-Seitenschneider / electronic cutter<br />
mit breitem, spitzem Kopf, Kopfbreite: 11 mm<br />
with wide pointed head, head width 11 mm<br />
Länge / length: 115 mm, Verpackungseinheit / packing unit: 5<br />
Best.-Nr.<br />
order-no.<br />
Z-103 6344<br />
Ausführung<br />
type<br />
mit Wate<br />
with side face<br />
harter Draht<br />
hard wire<br />
Schneidwerte / cutting specs.<br />
0.4<br />
mittelharter Draht<br />
half-hard wire<br />
Kupfer<br />
copper<br />
1.0 1.4<br />
Elektronik-Seitenschneider / electronic cutter<br />
mit breitem, spitzem Kopf, Kopfbreite: 11 mm<br />
with wide pointed head, head width 11 mm<br />
Länge / length: 115 mm, Verpackungseinheit / packing unit: 5<br />
Best.-Nr.<br />
order-no.<br />
Z-103 6345<br />
Ausführung<br />
type<br />
ganz ohne Wate<br />
full flush<br />
harter Draht<br />
hard wire<br />
-<br />
Schneidwerte / cutting specs.<br />
mittelharter Draht<br />
half-hard wire<br />
Kupfer<br />
copper<br />
- 1.0