A Practical Guide to 'Free-Energy' Devices

Fig.7 shows a modified embodiment which includes all of the elements shown in Fig.1 and Fig.2 but in addition
has a second stationary permanent magnet 102 which is mounted above rotating disc 52 and has its coil
members such as coil members 26A-38A mounted on its underside. Magnet 102 operates with the magnets 54
and 56 similarly to the magnet 24 and can operate in precisely the same manner, that is by producing attraction
force between the magnet members or by producing repulsion forces between them, each being used to produce
relative rotational movement between the rotor and the stator. It is also contemplated to make the construction
shown in Fig.7 so as to produce attraction forces between the magnets 54 and 56 on one side thereof and
cooperating repulsion forces which add to the rotation generating forces produced on the opposite side.
Fig.8 and Fig.9 are similar to Fig.3 and Fig.4 but show the relationship between the magnets 54 and 56 and the
members 24 and 102 located on opposite sides. These figures show one form of interaction between the rotating
magnets 54 and 56 and the stationary magnets 24 and 102 located as shown in Fig.7. In this construction, the
device produces attractive rotating force only.
A - 1007