DTM for EtherNet/IP Scanner Devices - Hilscher

Error Codes 106/149
9.4 Status & Error Codes EtherNet/IP Scanner
9.4.1 Error Codes Ethernet/IP Encapsulation - EipEncap Error
Status & Error Codes EtherNet/IP - EipEncap Error
Error Code (Definition) Value Description
TLR_E_EIP_ENCAP_COMMAND_INVALID 0xC01E0001 Invalid command received.
TLR_E_EIP_ENCAP_NOT_INITIALIZED 0xC01E0002 Encapsulation layer is not initialized.
TLR_E_EIP_ENCAP_OUT_OF_MEMORY 0xC01E0003 System is out of memory.
TLR_E_EIP_ENCAP_OUT_OF_PACKETS 0xC01E0010 Task runs out of empty packets at the local
packet pool.
TLR_E_EIP_ENCAP_SEND_PACKET 0xC01E0011 Sending a packet failed.
TLR_E_EIP_ENCAP_SOCKET_OVERRUN 0xC01E0012 No free socket is available.
TLR_E_EIP_ENCAP_INVALID_SOCKET 0xC01E0013 Socket ID is invalid.
TLR_E_EIP_ENCAP_CEP_OVERRUN 0xC01E0014 Connection could not be open. No
resource for a new Connection Endpoint
available.
TLR_E_EIP_ENCAP_UCMM_OVERRUN 0xC01E0015 Message couldn't send. All Unconnect
Message Buffers are in use.
TLR_E_EIP_ENCAP_TRANSP_OVERRUN 0xC01E0016 Connection couldn't be opened. All
transports are in use.
TLR_E_EIP_ENCAP_UNKNOWN_CONN_TYP 0xC01E0017 Received Message include an unknown
connection typ.
TLR_E_EIP_ENCAP_CONN_CLOSED 0xC01E0000 Connection was closed.
TLR_E_EIP_ENCAP_CONN_RESETED 0xC01E0019 Connection is reseted from remote device.
TLR_S_EIP_ENCAP_CONN_UNREGISTER 0x001E001A We closed the conncetion successful. With
an unregister command.
TLR_E_EIP_ENCAP_CONN_STATE 0xC01E001B Wrong connection state for this service.
TLR_E_EIP_ENCAP_CONN_INACTIV 0xC01E001C Encapsulation sesson was deactivated
TLR_E_EIP_ENCAP_INVALID_IPADDR 0xC01E001D received an invalid IP address.
TLR_E_EIP_ENCAP_INVALID_TRANSP 0xC01E001E Invalid transport typ.
TLR_E_EIP_ENCAP_TRANSP_INUSE 0xC01E001F Transport is still in use.
TLR_E_EIP_ENCAP_TRANSP_CLOSED 0xC01E0020 Transport is closed.
TLR_E_EIP_ENCAP_INVALID_MSGID 0xC01E0021 The received message has a invalid
message ID.
TLR_E_EIP_ENCAP_INVALID_MSG 0xC01E0022 invalid encapsulation message received.
TLR_E_EIP_ENCAP_INVALID_MSGLEN 0xC01E0023 Received message with invalid length.
TLR_E_EIP_ENCAP_CL3_TIMEOUT 0xC01E0030 Class 3 connection runs into timeout.
TLR_E_EIP_ENCAP_UCMM_TIMEOUT 0xC01E0031 Unconnected message gets a timeout.
TLR_E_EIP_ENCAP_CL1_TIMEOUT 0xC01E0032 Timeout of a class 3 connection.
TLR_W_EIP_ENCAP_TIMEOUT 0x801E0033 Encapsulation service is finished by
timeout.
TLR_E_EIP_ENCAP_CMDRUNNING 0xC01E0034 Encapsulation service is still running.
TLR_E_EIP_ENCAP_NO_TIMER 0xC01E0035 No empty timer available.
TLR_E_EIP_ENCAP_INVALID_DATA_IDX 0xC01E0036 The data index is unknown by the task.
Please ensure that it is the same as at the
indication.
TLR_E_EIP_ENCAP_INVALID_DATA_AREA 0xC01E0037 The parameter of the data area are invalid.
Please check length and offset.
DTM for EtherNet/IP Scanner Devices | Configuration of EtherNet/IP Scanner Devices
DOC061201OI06EN | Revision 6 | English | 2010-08 | Released | Public © Hilscher, 2006-2010