DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Error Codes 116/149<br />
Status & Error Codes TCP_<strong>IP</strong>-Task<br />
Error Code (Definition) Value Description<br />
TLR_E_TCP_ERR_INIT_OS_<br />
AND_TCPUDP_CYCLETIME<br />
0xC0080045 The combination of configured operating<br />
system cycle time and TCP/<strong>IP</strong> stacks cycle<br />
time (startup-parameter ulTcpCycleEvent)<br />
is not possible. The operating system cycle<br />
time must be smaller or equal than the<br />
TCP/<strong>IP</strong> stacks cycle time.<br />
TLR_E_TCP_ERR_SOCKET_ INVALID 0xC0080070 The socket handle ulDestId is invalid. A<br />
further reason <strong>for</strong> this error: The command<br />
(Mode) is not applicable on this socket<br />
type (TCP/UDP).<br />
TLR_E_TCP_ERR_OPTION_<br />
NOT_SUPPORTED_TCP_ CMD_SEND<br />
TLR_E_TCP_ERR_ PARAMETER_INVALID_<br />
TCP_UDP_CMD_SET_ SOCK_OPTION<br />
0xC0080074 The option parameter ulOptions in<br />
command TCP<strong>IP</strong>_TCP_CMD_SEND_REQ<br />
is invalid.<br />
0xC0080075 The parameter ulTtl (ulMode =<br />
TCP_SOCK_TTL) or ulMulticastTtl<br />
(ulMode = TCP_SOCK_MULTICAST_TTL)<br />
or ulMulticastLoop (ulMode =<br />
TCP_SOCK_MULTICAST_LOOP) in<br />
command<br />
TCP<strong>IP</strong>_TCP_UDP_CMD_SET_SOCK_<br />
OPTION_REQ is invalid.<br />
TLR_E_TCP_ERR_CONN_ CLOSED 0xC0080078 The connection has closed (Graceful<br />
close).<br />
TLR_E_TCP_ERR_CONN_ RESET 0xC0080079 The Connection has closed by reset (Hard<br />
close).<br />
TLR_E_TCP_ERR_PROTOCOL<br />
_UNKNOWN_TCP_UDP_CMD_ OPEN<br />
TLR_E_TCP_ERR_NO_ SOCKETS_TCP_UDP_<br />
CMD_OPEN<br />
TLR_E_TCP_ERR_MAX_<br />
PCKT_CNT_EXCEEDED_ UDP_CMD_SEND<br />
TLR_E_TCP_ERR_MAX_<br />
GROUP_EXCEEDED_TCP_<br />
UDP_CMD_SET_SOCK_ OPTION<br />
0xC008007A The protocol parameter ulProtocol in<br />
command<br />
TCP<strong>IP</strong>_TCP_UDP_CMD_OPEN_REQ is<br />
invalid.<br />
0xC008007B Command<br />
TCP<strong>IP</strong>_TCP_UDP_CMD_OPEN_REQ:<br />
There are no socket handles available.<br />
0xC0080084 Command<br />
TCP<strong>IP</strong>_UDP_CMD_SEND_REQ: The<br />
maximum number of queued packets ( =<br />
TCPHDL_RCX_PCKT_QUEUED_MAX (6)<br />
) has exceeded. The request command<br />
was rejected. The application must wait <strong>for</strong><br />
at least one confirmation command from<br />
stack be<strong>for</strong>e sending the next request<br />
command.<br />
0xC0080085 Command<br />
TCP<strong>IP</strong>_TCP_UDP_CMD_SET_SOCK_<br />
OPTION_REQ, ulMode =<br />
TCP_SOCK_ADD_MEMBERSH<strong>IP</strong>: The<br />
maximum number of <strong>IP</strong> multicast groups<br />
has exceeded (Default configuration = 64).<br />
TLR_E_TCP_ERR_DISCARD_ KEPT_REQ_CMD 0xC0080086 A kept request command has discarded.<br />
This confirmation has no further meaning<br />
<strong>for</strong> the application, unless the application<br />
must give back this packet to their<br />
resource pool!<br />
TLR_E_TCP_ERR_UNEXP_ ANSWER 0xC0080095 An unexpected/unknown confirmation<br />
command has received.<br />
TLR_E_TCP_TASK_F_ MESSAGESIZE 0xC0080097 The packet length parameter ulLen is<br />
invalid. The correct packet length depends<br />
on the command parameter ulCmd.<br />
<strong>DTM</strong> <strong>for</strong> <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong> | Configuration of <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong><br />
DOC061201OI06EN | Revision 6 | English | 2010-08 | Released | Public © <strong>Hilscher</strong>, 2006-2010
Change language