DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Settings 24/149<br />
3.2 Driver<br />
The Driver dialog pane displays the driver/s to be used <strong>for</strong> a <strong>EtherNet</strong>/<strong>IP</strong><br />
<strong>Scanner</strong> <strong>DTM</strong> to device communication connection.<br />
Figure 6: Driver Selection List<br />
Parameter Meaning<br />
3.2.1 Selecting the Driver<br />
Driver Name of the driver<br />
Version Version of the driver<br />
ID ID of the driver (driver identification)<br />
Table 11: Driver Selection List Parameters<br />
To establish a connection you need to select a driver first.<br />
Note: Not all the drivers displayed necessarily support the device. The<br />
used driver must be supported by the device or must be available <strong>for</strong> the<br />
device.<br />
To select the driver/s to be used:<br />
1. Select Settings > Driver in the navigation area.<br />
The available drivers are listed on the Driver dialog pane.<br />
Figure 7: Driver Selection List - recognized or installed Drivers<br />
2. Check the checkbox <strong>for</strong> the driver/s in the selection list.<br />
Figure 8: Driver Selection List - Driver/s selected<br />
<strong>DTM</strong> <strong>for</strong> <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong> | Configuration of <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong><br />
DOC061201OI06EN | Revision 6 | English | 2010-08 | Released | Public © <strong>Hilscher</strong>, 2006-2010