DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Error Codes 137/149<br />
9.7.3 Generic Device Error Codes<br />
Error Code (Definition) Value Description<br />
CIFX_DEV_DPM_ACCESS_ERROR 0x800C0010L Dual port memory not accessable<br />
(board not found)<br />
CIFX_DEV_NOT_READY 0x800C0011L Device not ready (ready flag failed)<br />
CIFX_DEV_NOT_RUNNING 0x800C0012L Device not running (running flag failed)<br />
CIFX_DEV_WATCHDOG_FAILED 0x800C0013L Watchdog test failed<br />
CIFX_DEV_SYSERR 0x800C0015L Error in handshake flags<br />
CIFX_DEV_MAILBOX_FULL 0x800C0016L Send mailbox is full<br />
CIFX_DEV_PUT_TIMEOUT 0x800C0017L Send packet timeout<br />
CIFX_DEV_GET_TIMEOUT 0x800C0018L Receive packet timeout<br />
CIFX_DEV_GET_NO_PACKET 0x800C0019L No packet available<br />
CIFX_DEV_MAILBOX_TOO_SHORT 0x800C001AL Mailbox too short<br />
CIFX_DEV_RESET_TIMEOUT 0x800C0020L Reset command timeout<br />
CIFX_DEV_NO_COM_FLAG 0x800C0021L COM-flag not set<br />
CIFX_DEV_EXCHANGE_FAILED 0x800C0022L IO data exchange failed<br />
CIFX_DEV_EXCHANGE_TIMEOUT 0x800C0023L IO data exchange timeout<br />
CIFX_DEV_COM_MODE_UNKNOWN 0x800C0024L Unknown IO exchange mode<br />
CIFX_DEV_FUNCTION_FAILED 0x800C0025L Device function failed<br />
CIFX_DEV_DPMSIZE_MISMATCH 0x800C0026L DPM size differs from configuration<br />
CIFX_DEV_STATE_MODE_UNKNOWN 0x800C0027L Unknown state mode<br />
CIFX_DEV_HW_PORT_IS_USED 0x800C0028L Device is still accessed<br />
CIFX_DEV_CONFIG_LOCK_TIMEOUT 0x800C0029L Configuration locking timeout<br />
CIFX_DEV_CONFIG_UNLOCK_TIMEOUT 0x800C002AL Configuration unlocking timeout<br />
CIFX_DEV_HOST_STATE_SET_TIMEOUT 0x800C002BL Set HOST state timeout<br />
CIFX_DEV_HOST_STATE_CLEAR_TIMEOUT 0x800C002CL Clear HOST state timeout<br />
CIFX_DEV_INITIALIZATION_TIMEOUT 0x800C002DL Timeout during channel initialization<br />
CIFX_DEV_BUS_STATE_ON_TIMEOUT 0x800C002EL Set Bus ON Timeout<br />
CIFX_DEV_BUS_STATE_OFF_TIMEOUT 0x800C002FL Set Bus OFF Timeout<br />
CIFX_DEV_MODULE_ALREADY_RUNNING 0x800C0040L Module already running<br />
CIFX_DEV_MODULE_ALREADY_EXISTS 0x800C0041L Module already exists<br />
Table 68: Generic Device Error Codes<br />
<strong>DTM</strong> <strong>for</strong> <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong> | Configuration of <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong><br />
DOC061201OI06EN | Revision 6 | English | 2010-08 | Released | Public © <strong>Hilscher</strong>, 2006-2010
Change language