DTM for EtherNet/IP Scanner Devices - Hilscher

Lists 143/149
10 Lists
10.1 List of Figures
Figure 1: Dialog Structure of EtherNet/IP Scanner DTM 13
Figure 2: Navigation Area 14
Figure 3: Status Bar – Status Fields 1 to 6 17
Figure 4: Status Bar Display Examples 17
Figure 5: Navigation Area - Settings 23
Figure 6: Driver Selection List 24
Figure 7: Driver Selection List - recognized or installed Drivers 24
Figure 8: Driver Selection List - Driver/s selected 24
Figure 9: Navigation Area – Settings 25
Figure 10: netX Driver > USB/RS232 Connection 29
Figure 11: netX Driver > TCP Connection 32
Figure 12: Device Assignment - detected Devices (* The name of the device class is displayed.) – Example
for a device without firmware 36
Figure 13: Device Assignment - detected Devices (* The name of the device class is displayed.) Example for
Devices without Firmware 38
Figure 14: Device Assignment - Selecting the Device (* The name of the device class is displayed.) –
Example for a device without firmware / one Device is selected 39
Figure 15: Device Assignment - Selecting the Device (* The name of the device class is displayed.) –
Example for Devices with and without Firmware / one Device is selected 40
Figure 16: Device Assignment - Selecting the Device (* The name of the device class is displayed.) –
Example for a device with firmware / one Device is selected 41
Figure 17: Firmware Download 42
Figure 18: Selection Window Select Firmware File 43
Figure 19: Request Select Firmware File - Example 44
Figure 20: Firmware Download – Download 45
Figure 21: Firmware-Download – Question) 45
Figure 22: Clock Symbol and Hook Symbol green 46
Figure 23: Clock Symbol and Hook Symbol green 46
Figure 24: Navigation Area - Configuration 47
Figure 25: Configuration > Network Settings 48
Figure 26: Configuration > Scanlist 49
Figure 27: Process Data (*The name of the Adapter device is displayed.) 51
Figure 28: Configuration > Address Table (In the Figure shown here, in the column Device or Name example
devices are displayed.) 52
Figure 29: Configuration > Address Table - Display Mode 53
Figure 30: Configuration > Scanner Settings 55
Figure 31: Scanner Settings > Start of Bus Communication 56
Figure 32: Scanner Settings > Application Monitoring 56
Figure 33: Scanner Settings > Module Alignment 57
Figure 34: Navigation Area - Diagnosis 58
Figure 35: Firmware Diagnosis (*The name of the Firmware is displayed.) 59
Figure 36: General Diagnosis 60
Figure 37: Master Diagnosis 63
Figure 38: Navigation Area - Extended Diagnosis 65
Figure 39: Extended Diagnosis > [Folder Name] > Task Information 66
Figure 40: Extended Diagnosis > [Folder Name] > IniBatch Status Display 67
Figure 41: Extended Diagnosis > [Folder Name] > Code Diagnosis 68
Figure 42: Extended Diagnosis > EIS_ENCAP_TASK > Encap Command Counter 69
Figure 43: Extended Diagnosis > EIS_ENCAP_TASK > Packet Counter 70
DTM for EtherNet/IP Scanner Devices | Configuration of EtherNet/IP Scanner Devices
DOC061201OI06EN | Revision 6 | English | 2010-08 | Released | Public © Hilscher, 2006-2010