DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Settings 27/149<br />
3.2.4 netX Driver<br />
The netX Driver is used to connect the <strong>DTM</strong> to the device via different<br />
connection types. The <strong>DTM</strong> communicates with the device via an USB<br />
connection, a serial (RS232) connection or a TCP/<strong>IP</strong> connection. The netX<br />
Driver establishes<br />
• via the USB interface of the device and the USB port of the PC an USB<br />
connection to the device,<br />
• via the RS232 interface of the device and the COM port of the PC a<br />
serial connection (RS232) to the device<br />
• and via Ethernet a TCP/<strong>IP</strong> connection to the device.<br />
To connect the <strong>DTM</strong> to the physical layer of the device the netX Driver<br />
software works in combination with the software components:<br />
• “USB/COM connector” <strong>for</strong> the USB connection and <strong>for</strong> the serial<br />
connection (RS232) and<br />
• “TCP/<strong>IP</strong> connector” <strong>for</strong> the Ethernet connection.<br />
<strong>DTM</strong> <strong>for</strong> <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong> | Configuration of <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong><br />
DOC061201OI06EN | Revision 6 | English | 2010-08 | Released | Public © <strong>Hilscher</strong>, 2006-2010
Change language