DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Settings 42/149<br />
3.4 Firmware Download<br />
Using the Firmware Download dialog a firmware can be transferred to the<br />
device.<br />
CAUTION! The firmware download<br />
- Stops the bus communication,<br />
- erases the configuration data base and<br />
- overwrites the existing firmware in the device.<br />
To complete the update and to make the device operable again, please<br />
re-download the configuration when this operation has finished.<br />
Note: Prior to the firmware download, you must select the driver and the<br />
<strong>Scanner</strong> device (with or without firmware).<br />
For further in<strong>for</strong>mation refer to section Overview Settings on page 23.<br />
To load the firmware to the device:<br />
1. In the navigation area select Settings > Firmware Download.<br />
The dialog Firmware-Download pane is displayed.<br />
Figure 17: Firmware Download<br />
Parameter Meaning<br />
Name Name of the Firmware<br />
Version Version and Build Version of the Firmware<br />
Browse… Button to select the firmware file.<br />
Download Button to download the firmware.<br />
Table 15: Parameter Firmware Download<br />
2. Select Browse.<br />
The selection window Select Firmware File is displayed.<br />
<strong>DTM</strong> <strong>for</strong> <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong> | Configuration of <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong><br />
DOC061201OI06EN | Revision 6 | English | 2010-08 | Released | Public © <strong>Hilscher</strong>, 2006-2010