DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
DTM for EtherNet/IP Scanner Devices - Hilscher
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Error Codes 115/149<br />
9.4.5 Status & Error Codes TCP_<strong>IP</strong>-Task<br />
Status & Error Codes TCP_<strong>IP</strong>-Task<br />
Error Code (Definition) Value Description<br />
TLR_S_OK 0x00000000 Status ok<br />
TLR_E_<strong>IP</strong>_ERR_INIT_NO_ ETHERNET_ADDR 0xC0070034 There is no Ethernet address (MAC<br />
address) available.<br />
TLR_E_<strong>IP</strong>_ERR_INIT_INVALID_ FLAG 0xC0070036 The start parameters contain one or more<br />
unknown flags.<br />
TLR_E_<strong>IP</strong>_ERR_INIT_INVALID_ <strong>IP</strong>_ADDR 0xC0070037 The start parameters contain an invalid <strong>IP</strong><br />
address.<br />
TLR_E_<strong>IP</strong>_ERR_INIT_INVALID_ NETMASK 0xC0070038 The start parameters contain an invalid<br />
subnet mask.<br />
TLR_E_<strong>IP</strong>_ERR_INIT_ UNKNOWN_HARDWARE 0xC007003B The device type is unknown.<br />
TLR_E_<strong>IP</strong>_ERR_INIT_NO_<strong>IP</strong>_ ADDR 0xC007003C Failed to obtain an <strong>IP</strong> address from the<br />
specified source(s).<br />
TLR_E_<strong>IP</strong>_ERR_INIT_DRIVER_ FAILED 0xC007003D The initialization of the driver layer (EDD)<br />
is failed.<br />
TLR_E_<strong>IP</strong>_ERR_INIT_NO_<strong>IP</strong>_ ADDR_CFG 0xC007003E There is no source <strong>for</strong> an <strong>IP</strong> address<br />
(BOOTP, DHCP, <strong>IP</strong> address parameter)<br />
specified.<br />
TLR_E_<strong>IP</strong>_ERR_ETH_ADDR_<br />
INVALID_<strong>IP</strong>_CMD_SET_PARAM<br />
TLR_E_<strong>IP</strong>_ERR_ARP_CACHE_FULL_<strong>IP</strong>_CMD_S<br />
ET_PARAM<br />
TLR_E_<strong>IP</strong>_ERR_ARP_ENTRY_<br />
NOT_FOUND_<strong>IP</strong>_CMD_SET_ PARAM<br />
TLR_E_<strong>IP</strong>_ERR_ARP_ENTRY_<br />
NOT_FOUND_<strong>IP</strong>_CMD_GET_ PARAM<br />
0xC007007C The Ethernet address (MAC address)<br />
abEthernetAddr in command<br />
TCP<strong>IP</strong>_<strong>IP</strong>_CMD_SET_PARAM_REQ is<br />
invalid. Invalid means, abEthernetAddr is<br />
equal to the broadcast address FF-FF-FF-<br />
FF-FF-FF.<br />
0xC0070083 The command<br />
TCP<strong>IP</strong>_<strong>IP</strong>_CMD_SET_PARAM_REQ<br />
could not be executed, because the ARP<br />
cache is full. The ARP cache has per<br />
default configuration 64 entries.<br />
0xC0070086 The specified ARP entry in command<br />
TCP<strong>IP</strong>_<strong>IP</strong>_CMD_SET_PARAM_REQ<br />
could not be deleted. The ARP entry was<br />
not found in ARP cache.<br />
0xC0070087 The requested ARP in<strong>for</strong>mation in<br />
command<br />
TCP<strong>IP</strong>_<strong>IP</strong>_CMD_GET_PARAM_REQ<br />
could not be delivered. The ARP entry was<br />
not found in ARP cache.<br />
TLR_E_<strong>IP</strong>_ERR_DELAYED 0xC00700FE Special internalIpStart function.<br />
TLR_E_<strong>IP</strong>_ERR_GENERIC 0xC00700FF Special internalIpStart function.<br />
TLR_E_TCP<strong>IP</strong>_TCP_TASK_ COMMAND_INVALID 0xC0080001 Invalid command received.<br />
TLR_E_TCP<strong>IP</strong>_TCP_TASK_<br />
0xC0080002 Cancel process is in progress, command<br />
PROCESS_CANCELED<br />
can not be executed.<br />
TLR_E_TCP_ERR_INIT_<strong>IP</strong>_ TASK_NOT_READY 0xC0080032 The <strong>IP</strong> layer is not ready.<br />
TLR_E_TCP_ERR_INIT_<strong>IP</strong>_ TASK_FAILED 0xC0080034 The initialization of <strong>IP</strong> layer has failed.<br />
TLR_E_TCP_ERR_INIT_ CREATE_INFO_FIELD 0xC0080040 The creation of an in<strong>for</strong>mation field (task<br />
state) has failed.<br />
TLR_W_TCP_ERR_INIT_TPIF_ INIT_REQ_PCKT 0x80080043 Warning: A pending application packet has<br />
discarded (because of a new application<br />
packet).<br />
TLR_E_TCP_ERR_INIT_OS_ CYCLETIME 0xC0080044 The configured operating system cycle<br />
time is out of range (0.1 ms ... 20 ms).<br />
<strong>DTM</strong> <strong>for</strong> <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong> | Configuration of <strong>EtherNet</strong>/<strong>IP</strong> <strong>Scanner</strong> <strong>Devices</strong><br />
DOC061201OI06EN | Revision 6 | English | 2010-08 | Released | Public © <strong>Hilscher</strong>, 2006-2010
Change language