User Manual optiPoint 500 HP500-HP3000-HP5000 - Siemens ...

Making Calls – Convenience Functions
Step by Step
36
Opening the door with a code (at the door):
o After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call signal
may or may not be forwarded.
Activating the door opener:
Program/Service Press the key. The LED lights up
> * :
or
Select and confirm.
qlm Enter the code.
89=Door opener on?
o Dial the entrance telephone number.
o
or
Enter the five-digit code. Default code = "00000".
> 3=change password? :
Select the displayed function and press the "OK" dialog
key to change the code.
> 1=enable with ring? :
or
Select and confirm.
> 2=enable w/o ring? : You can also open the door without a doorbell ring.
Program/Service
Deactivating the door opener:
Press the key. The LED lights up.
> #89=Door opener off?
:
or
Select and confirm.
rlm Enter the code.
Accepting a Call From an Answering Machine
You can accept a call from any answering machine if the
machine is connected to your system (contact your service
personnel) and you have programmed the answering
machine number on a key Page 62.
The LED lights up. Press the key.