User Manual optiPoint 500 HP500-HP3000-HP5000 - Siemens ...
User Manual optiPoint 500 HP500-HP3000-HP5000 - Siemens ...
User Manual optiPoint 500 HP500-HP3000-HP5000 - Siemens ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Making Calls – Convenience Functions<br />
Step by Step<br />
52<br />
Parking a Call<br />
Program/Service<br />
You can park up to ten calls, either internal, external, or<br />
both. Parked calls can be displayed on and picked up<br />
from another telephone. This feature is useful if you<br />
want to continue a call at another phone.<br />
Precondition: You are conducting a call.<br />
Press the key. The LED lights up.<br />
> * :<br />
or<br />
Select and confirm.<br />
qij Enter the code.<br />
d ... m Enter the number of the park slot (0 - 9) and make a note<br />
of it. If the park slot number you entered is not displayed,<br />
it is already in use; enter another one.<br />
56=Park a call?<br />
Retrieving a Parked Call<br />
Precondition: One or more calls have been parked. The<br />
telephone is idle.<br />
Press the key. The LED lights up.<br />
> : Select and confirm [1] Program/Service<br />
Retrieve call?<br />
or<br />
.<br />
rij Enter the code.<br />
d ... m Enter the park slot number you noted earlier.<br />
If the park slot number you enter is not in use, you cannot<br />
retrieve the call.<br />
If a parked call is not picked up, after a specific<br />
period of time the call is returned to the telephone<br />
from where it was parked (recall).<br />
[1] "Different Displays in a HiPath 4000 Environment<br />
(Not for HiPath <strong>500</strong>)" Page 120