User Manual optiPoint 500 HP500-HP3000-HP5000 - Siemens ...

Step by Step
Making Calls – Convenience Functions
If an optiPoint application module is connected to
your telephone, the "Terminal Mode" is activated
once the function is started Page 117.
The prompts are now shown on the optiPoint application
module display.
You can use the keys on the optiPoint application
module.
Next?
: To display other stations, confirm each subsequent display.
> Exit list?
: To exit the list: Select and confirm.
Removing Parties From the Conference (Initiator Only)
> View conf parties? : Select and confirm.
The first station appears on the screen.
Next?
: Confirm as often as required until the desired station
appears.
> Remove party? : Select and confirm.
> US: Leave conference? :
Leaving a Conference
Select and confirm.
> UK: Withdraw? :
or
t Replace the handset, if this feature is configured (contact
your service personnel).
Ending a Conference (Initiator Only)
> End conference? :
or
Select and confirm.
Program/Service rg
or
Press the key. The LED lights up. Enter the code. The
LED goes out.
t Replace the handset, if this feature is configured (contact
your service personnel).
> Drop last conf. party? :
or
Removing the ISDN Central Office Party From the Conference
Select and confirm.
Program/Service
Press the key. The LED lights up. Enter the code. The
qhme LED goes out.
55