VessRAID Setup - Promise Technology, Inc.

Reconditioning a Battery
103
Chapter 4: Management with WebPAM PROe
A cache backup battery or Battery Backup Unit (BBU) is optional on VessRAID.
To recondition the battery:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Enclosure icon.
4. Click the Battery tab in Management View.
5. From the Battery tab dropdown menu, choose Recondition.
6. Click the Submit button.
Reconditioning fully discharges, then fully recharges the battery. During
reconditioning, if the Adaptive Writeback Cache function is enabled, the
controller cache is set to Write Thru. After reconditioning, the cache is reset
to Write Back. See “Making Controller Settings” on page 96.
VessRAID automatically reconditions the battery every two months. To set
the recondition schedule, see “Scheduling an Activity” on page 58.
Silencing the Buzzer
The buzzer sounds to inform you that the VessRAID needs attention. See
“VessRAID is Beeping” on page 277 for more information.
To silence the buzzer for the current trigger event:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Enclosure icon.
4. Click the Buzzer tab in Management View.
5. Click the Mute button.
The buzzer goes silent. If another trigger event occurs, the buzzer will sound
again.
To silence the buzzer for all trigger events, disable it under “Making Buzzer
Settings.”
Making Buzzer Settings
To make buzzer settings:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Enclosure icon.