VessRAID Setup - Promise Technology, Inc.

VessRAID 1000i Series Product Manual
Reported Event Corrective Action
Logical drive initialization
has stopped
Logical drive initialization
marks the logical drive
offline
Logical drive initialization
is aborted due to an
internal error.
Logical drive initialization
is queued
A new logical drive has
been created
Logical drive has been
deleted
Logical drive has been
placed online
Logical drive has been
placed online. Possible
data loss
Logical drive has been set
to critical.
Logical drive axle has
been placed online
Media Patrol
Initialization stopped because of user intervention,
schedule or the logical drive was deleted or went
critical or offline.
Initialization failure due to a failed disk drive. Replace
the disk drive, delete and recreate the logical drive.
See page 114 (WebPAM PROe) or page 158 (CLU).
System resources are low. Reduce system load or
restart the VessRAID. See page 94 (WebPAM PROe)
or page 207 (CLU).
Initialization has been set manually or by schedule.
Result of user action. Normal.
Result of user action. Normal.
The physical drives of the array are restored to online
status.
One or more physical drives in the array went offline.
See page 302.
One or more physical drives in the array went offline.
See page 302.
RAID 50 and 60. One of the axles (RAID 5 or 6
arrays) returned on online status.
Media patrol is started Result of settings or user action. Normal.
Media patrol is completed Normal.
Media patrol is paused Media patrol paused because of user intervention,
schedule or a higher priority background activity.
Media patrol is resumed Media patrol has resumed again after a pause.
Media patrol is stopped Media patrol stopped because of user intervention,
schedule or the logical drive was deleted or went
critical or offline.
Media patrol is aborted System resources are low. Reduce system load or
due to an internal error. restart the VessRAID. See page 94 (WebPAM PROe)
or page 207 (CLU).
294