VessRAID Setup - Promise Technology, Inc.

Starting or Restarting SLP service
81
Chapter 4: Management with WebPAM PROe
To start or restart the SLP service, click the Start or Restart button.
Making Web Server Settings
The Web Server service connects your browser to the WebPAM PROe GUI on
the VessRAID subsystem.
To make Web Server settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Web Server Setting link in Management View.
4. Enter the HTTP Port number.
80 is the default.
5. Enter Session Time Out interval.
This setting causes WebPAM PROe to time-out after a period of inactivity. 24
minutes is the default. The range is 1 to 1440 minutes (one day).
6. If you want to use a secure connection, check the Enable SSL box.
7. If you checked the Enable SSL box, enter a HTTPS Port number.
443 is the default.
8. If you want to download a SSL Certificate, check the Download Certificate
box.
9. If you checked the Download Certificate box, enter the Certificate filename
or click the Browse... button to locate it.
10. Click the Submit button.
11. Click OK in the confirmation box to restart the Web Server service with your
changes.
Changing the Startup Setting
1. Under Startup Type:
• Click the Automatic option to start the service automatically during
system startup. Recommended.
• Click the Manual option to start the service manually (the service does
not start during system startup).
2. Click the Submit button.
Stopping Web Server service
To stop the Web Server service:
1. Click the Stop button.