VessRAID Setup - Promise Technology, Inc.

143
Chapter 5: Management with the CLU
Background Activity – Settings for Media Patrol, Auto Rebuild, Rebuild,
Migration, PDM, Transition, Synchronization, Initialization, Redundancy Check
rate, and thresholds.
Event Viewer – View the event logs.
Additional Info and Management – Spare Drives, LUN Mapping, User
management, Email, SLP, Web Server, Telnet, SNMP, and Netsend settings,
firmware flash, clear statistics and restore factory default settings.
Buzzer – Enable, disable or silence the buzzer (audible alarm).
Accessing Online Help
To access online help on any CLU screen, press Ctrl-E.
To return to the CLU, press Enter.
Exiting the CLU
1. Highlight Return to Previous Menu and press Enter.
Repeat this action until you arrive at the Main Menu.
2. From the Main Menu, highlight Return to CLI and press Enter to exit
3. Close the terminal emulation, Telnet or terminal window.
Logging Out of the CLI
When you shut down or restart the VessRAID subsystem, you are automatically
logged out of the CLI.
To manually log out of the CLI (no shut down or restart):
At the username@cli> prompt, type logout and press Enter.
The prompt changes to cli>.
Logging Back Into the CLI and CLU
To log into the CLI and CLU after a manual logout:
1. At the cli:> prompt, type login followed by your user name and press Enter.
2. At the Password: prompt, type your password and press Enter.
3. At the username@cli> prompt, type menu and press Enter to open the CLU.