23.03.2013 Views

VessRAID Setup - Promise Technology, Inc.

VessRAID Setup - Promise Technology, Inc.

VessRAID Setup - Promise Technology, Inc.

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 6: Management with the LCD Panel<br />

This chapter covers the following topics:<br />

• Using the LCD Panel (below)<br />

• Perusing the Interface (page 212)<br />

• Managing the Network Connection (page 214)<br />

• Managing the Controller (page 216)<br />

• Managing Enclosures (page 217)<br />

• Managing Physical Drives (page 218)<br />

• Managing Disk Arrays (page 219)<br />

• Managing Spare Drives (page 228)<br />

Using the LCD Panel<br />

The LCD panel is optional and typically installed during <strong>VessRAID</strong> installation.<br />

See page 11.<br />

The LCD panel activates approximately 35 seconds after you switch on the<br />

<strong>VessRAID</strong>’s power supply.<br />

At first, the LCD screen displays System is Initializing.<br />

When the <strong>VessRAID</strong> is fully booted and running under normal conditions, the<br />

LCD screen displays the <strong>VessRAID</strong> model number and IP address, as shown in<br />

Figure 1.<br />

Figure 1. LCD default display<br />

If the LCD panel displays Check Event, see “Chapter 9: Troubleshooting” on<br />

page 277 for more information on diagnosing the issue.<br />

211

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!