VessRAID Setup - Promise Technology, Inc.

71
Chapter 4: Management with WebPAM PROe
The Target Ports tab displays the following information:
• Controller ID – 1
• Port ID – 1, 2, 3, or 4
• Max Receive Data Segment Length – 8 KB is the default
• Number of Active Sessions – Number of sessions logged into this port
• Primary Header Digest Method – CRC-32
• Primary Data Digest Method – CRC-32
• iSCSI Receive Marker – None
Viewing the iSCSI Portal
An iSCSI Portal is an iSCSI data port.
To view the iSCSI portals:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the iSCSI Management icon.
4. Click the Portals tab in Management View.
The Portals tab displays the following information:
• Portal ID – 0 to 34
• IP Address – IP address of the port
• Associated Type – iSCSI
• IF Name – Port number
• TCP port number – 3260 is the default
Viewing iSCSI Sessions
To view a list of the current iSCSI sessions:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the iSCSI Management icon.
4. Click the Sessions tab in Management View.
The window displays a list of the current iSCSI sessions.
5. Click the iSCSI Sessions link to display information about an individual
session.