HP Integrity Virtual Machines 4.2.5 - HP Business Support Center

More documents

Recommendations

Info

3. Edit the elilo configuration file, /boot/efi/SuSE/elilo.conf, and the fstab file, /mnt/ etc/fstab, to update all entries of the guest boot disk SCSI WWID with the cloned guest boot disk's SCSI WWID. NOTE: The cloned guest's boot disk SCSI WWID can be copied from the /dev/disk/ by-id/ device names. For example, the cloned guest boot disk device names are as follows: Rescue:~ # ls -l /dev/disk/by-id total 0 lrwxrwxrwx 1 root root 9 Dec 5 17:08 scsi-0HP_Virtual_FileDVD_isoLinuxSLES10-SP2SLES-10-SP2- DVD-i -> ../../sr0 lrwxrwxrwx 1 root root 9 Dec 5 17:08 scsi-3600508b4001049440001200002f20000 -> ../../sda lrwxrwxrwx 1 root root 10 Dec 5 17:08 scsi-3600508b4001049440001200002f20000-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Dec 5 17:08 scsi-3600508b4001049440001200002f20000-part2 -> ../../sda2 lrwxrwxrwx 1 root root 10 Dec 5 17:08 scsi-3600508b4001049440001200002f20000-part3 -> ../../sda3 4. In /boot/efi/SuSE/elilo.conf, there are two root device entries with the original quest's boot disk SCSI WWID: root = /dev/disk/by-id/scsi-3600508b4001049440000d000026c0000-part3 root = /dev/disk/by-id/scsi-3600508b4001049440000d000026c0000-part3 Replace these entries with the cloned boot disk's SCSI WWID: root = /dev/disk/by-id/scsi-3600508b4001049440001200002f20000-part3 root = /dev/disk/by-id/scsi-3600508b4001049440001200002f20000-part3 5. In /mnt/etc/fstab, there are three entries (for /, /boot/efi, and swap devices) with the original guest's boot disk SCSI WWID: /dev/disk/by-id/scsi-3600508b4001049440000d000026c0000-part3 / reiserfs acl,user_xattr 1 1 /dev/disk/by-id/scsi-3600508b4001049440000d000026c0000-part1 /boot/efi vfat defaults 0 0 /dev/disk/by-id/scsi-3600508b4001049440000d000026c0000-part2 swap defaults 0 0 Replace these entries with the cloned boot disk's SCSI WWID: /dev/disk/by-id/scsi-3600508b4001049440001200002f20000-part3 / reiserfs acl,user_xattr 1 1 /dev/disk/by-id/scsi-3600508b4001049440001200002f20000-part1 /boot/efi vfat defaults 0 0 /dev/disk/by-id/scsi-3600508b4001049440001200002f20000-part2 swap swap defaults 0 0 6. Reboot the guest: Rescue:/# reboot 4.3.2.3 TC INIT Dump Messages Fail to Appear in SUSE Linux Guest Consoles Running Multi CPUs The hpvmconsole TC command causes INIT dump messages to be displayed in the guest console. These messages appear with the one-way SUSE Linux guest; however, they fail to appear with SUSE Linux guests with multi-CPUs. The INIT dump is logged into the hpvm_mon_log file. To resolve this problem, restart the guest after the hpvmconsole TC command is issued. 4.3.2.4 SLES10 SP2 Guests Supported on Integrity Servers 48 Installing Guests SLES10 SP2 guests are supported on all Integrity servers except the following: • HP Integrity rx1600 server • HP Integrity rx2600 server • HP Integrity rx5600 server
4.3.2.5 Before Installing the SUSE Linux Guest You must install the tog-pegasus RPM kit prior to installing the SUSE Linux RPM guest; however, the SUSE Linux installation media does not contain the tog-pegasus RPM kit. This RPM kit is available in the “HP Integrity Essentials Foundation Pack for Linux” (also known as HPIEFL for Linux). The SUSE Linux RPM guest kit is actually two parts, a guest kit and a provider kit. The Hpvm.*.rpm kit contains: • Tuning scripts • hpvminfo • hpvmcollect • Guest library The Hpvmprovider.*.rpm kit contains the VMprovider and related files. This RPM requires that both the hpvm and tog-pegasus kits must be installed. http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T2387AA The information you need is provided in Chapter 5 of the HP Integrity Essentials Foundation Pack for Linux User's Guide. To download the HPIEFL for Linux kit, click the link http://www.hp.com/go/integritylinuxessentials listed in Chapter 5, then click Download for HP Integrity Essentials Foundation Pack for Linux link on this website. 4.3.2.6 Installing Linux Guest Management Software for the First Time The first time you install the Linux guest management software, the following error might occur: === from /var/log/messages file === Jan 18 22:45:00 1sn000 kernel: ipmi_si: Error clearing flags: cl === from "dmesg" command === ipmi_si: Error clearing flags: cl You can ignore this error message. 4.3.2.7 ACPI Warnings, Errors, and Exceptions Displayed when SUSE Guest Booted When an installed SUSE guest is booted, messages similar to the following are displayed on the guest's console: Loading processor ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] ACPI Warning (acpi_processor-0555): BIOS reporting wrong ACPI id for the processor [20060127] ACPI Exception (evxface-0538): AE_BAD_PARAMETER, Removing notify handler [20060127] ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] ACPI Warning (acpi_processor-0555): BIOS reporting wrong ACPI id for the processor [20060127] ACPI Exception (evxface-0538): AE_BAD_PARAMETER, Removing notify handler [20060127] ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] ACPI Warning (acpi_processor-0555): BIOS reporting wrong ACPI id for the processor [20060127] ACPI Exception (evxface-0538): AE_BAD_PARAMETER, Removing notify handler [20060127] ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] ACPI Warning (acpi_processor-0555): BIOS reporting wrong ACPI id for the processor [20060127] ACPI Exception (evxface-0538): AE_BAD_PARAMETER, Removing notify handler [20060127] ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] ACPI Warning (acpi_processor-0555): BIOS reporting wrong ACPI id for the processor [20060127] ACPI Exception (evxface-0538): AE_BAD_PARAMETER, Removing notify handler [20060127] ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] ACPI Warning (acpi_processor-0555): BIOS reporting wrong ACPI idfor the processor [20060127] ACPI Exception (evxface-0538): AE_BAD_PARAMETER, Removing notify handler [20060127] ACPI Error (acpi_processor-0500): Invalid PBLK length [0] [20060127] . . . ACPI Warning (acpi_processor-0555): BIOS reporting wrong ACPI id for the processor [20060127] ACPI Exception (evxface-0538): AE_BAD_PARAMETER, Removing notify handler [20060127] 4.3 Linux Guests 49
Page 1 and 2: HP Integrity Virtual Machines 4.2.5
Page 3 and 4: Contents About This Document.......
Page 5 and 6: 4.3.2 Known Issues and Information.
Page 7 and 8: 7.2.3 Known Limitation on OpenVMS G
Page 9 and 10: 11.9 Network Interface Support.....
Page 11 and 12: About This Document The HP Integrit
Page 13 and 14: Publication Number T2767-90076 T276
Page 15 and 16: 1 Introduction Thank you for instal
Page 17 and 18: Table 1 Guest and VM Host Support (
Page 19 and 20: 2 Installation Notes This chapter c
Page 21 and 22: • You might receive a read error
Page 23 and 24: 2.3.10 Failures in Key Applications
Page 25 and 26: Serviceguard, as documented in the
Page 27 and 28: to properly run or even boot. If th
Page 29 and 30: Table 3 VM Host Patches (continued)
Page 31 and 32: Table 3 VM Host Patches (continued)
Page 33 and 34: 11i v2 0505 or later 11i v2 Intel I
Page 35 and 36: Table 5 HP-UX Guest Patches (contin
Page 37 and 38: 3 Creating Virtual Machines This ch
Page 39 and 40: 4 Installing Guests This chapter de
Page 41 and 42: • After the automatic reboot, Win
Page 43 and 44: [my_guest] vMP> in Insertable Guest
Page 45 and 46: • HP-UX 11i v2: PHCO_40685 and PH
Page 47: • Red Hat Enterprise Linux 4 Inst
Page 51 and 52: Use ^ and v to change option(s). Us
Page 53 and 54: ***********************************
Page 55 and 56: 5 Using Integrity VM Commands This
Page 57 and 58: 5.2.6.1 The hpvmdevtranslate Comman
Page 59: hpvmmodify: WARNING (test_duperr):
Page 62 and 63: NOTE: If you add new devices in the
Page 64 and 65: # useradd -r no -g users -s /opt/hp
Page 66 and 67: used by guests but requires users t
Page 69 and 70: 7 Networking Information This chapt
Page 71 and 72: 7.2.2 AVIO LAN Devices Left Unclaim
Page 73 and 74: incorrectly. To help mitigate this
Page 75 and 76: By default, Integrity VM makes thre
Page 77 and 78: Task Turn TSO off on lan0. Allow th
Page 79 and 80: 8 Storage Information This chapter
Page 81 and 82: GuestAVIOStor: Instance numbers for
Page 83 and 84: 8.2.14 The hpvmmodify Command Fails
Page 85 and 86: -H of the lunpath or tgtpath H/W Pa
Page 87: 1. In the guest, execute rmsf for t
Page 90 and 91: Can't open VM /var/opt/hpvm/uuids/c
Page 93 and 94: 10 Error Logging This chapter conta
Page 95 and 96: 11 Integrity VM Support Policy This
Page 97 and 98: 11.4 HP-UX Guest Support Type of Gu
Page 99 and 100:
1 Intel® Itanium® 2 9000 Series a
Page 101 and 102:
11.8.1 Guest Attached Device Suppor
Page 103 and 104:
can be configured with Auto Port Ag
Page 105 and 106:
A hpvmhostgdev Manpage 105
Page 107 and 108:
-l Lists unused devices that can be
show all

HP Integrity Virtual Machines 4.2.5 - HP Business Support Center

Create successful ePaper yourself

Delete template?

Save as template?