 Apple Technician Guide - tim.id.au

Removal
1 Use black stick to
disconnect cable from
connector on logic
board and carefully
pry cable from top of
speaker.
2 Remove 4 screws:
• 2 (3.0-mm) 922-9036
on cable
• 2 (9.5-mm) 922-9105
on front bracket
3 Peel up cable from
top case.
Replacement
1 Press cable so it lays
flat in top case.
2 Make sure rubber
gaskets are installed
on front bracket
before installing 2
(9.5-mm) screws.
2010-08-05
MacBook Pro (15-inch, 2.53 GHz, Mid 2009) Take Apart — Hard Drive/IR/Sleep Indicator Cable 136