Apple Technician Guide - tim.id.au
Apple Technician Guide - tim.id.au
Apple Technician Guide - tim.id.au
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2010-08-05<br />
2. Can optical drive read both CD<br />
and DVD known-good media?<br />
3. Reseat cable connections<br />
at logic board and optical<br />
drive. Verify that media is now<br />
recognized and reads reliably.<br />
4. Disconnect optical drive by<br />
lifting SATA cable at logic<br />
board and connecting a<br />
known-good optical drive.<br />
Verify that media is now<br />
recognized and reads reliably.<br />
5. Install and test with<br />
replacement optical drive SATA<br />
flex cable. Verify that media<br />
is now recognized and reads<br />
reliably.<br />
6. Test write data to compatible<br />
CD and DVD media. Verify<br />
burned media is recognized<br />
and reads reliably.<br />
Yes Go to step 6<br />
No Reading CD only or DVD only<br />
indicates laser issue, replace<br />
optical drive.<br />
Optical drive cannot read any<br />
media reliably, go to step 3.<br />
MacBook Pro (15-inch, 2.53 GHz, M<strong>id</strong> 2009) Symptom Charts — Mass Storage 89<br />
J03<br />
Yes Reseat resolved issue. X03<br />
No Go to step 4.<br />
Yes SATA port functional,<br />
reconnect user’s optical drive<br />
& SATA cable. Go to step 5.<br />
No Replace logic board. M19<br />
Yes Cable change resolved issue. X03<br />
No Replace the optical drive.<br />
(Mechanical damage to<br />
optical drive, if found)<br />
Yes Issue resolved.<br />
No Replace the optical drive.<br />
(Mechanical damage to<br />
optical drive, if found)<br />
J03<br />
(J05)<br />
J03<br />
(J06)