 Apple Technician Guide - tim.id.au

Removal
1 Remove 3 screws
• 3 (3.5-mm) 922-8719.
2 Using a black stick,
gently remove shim
located next to
camera cable
connector. Set shim
aside.
Note: If you don’t
remove the shim
prior to disconnecting
the cable, you could
damage the cable
pins or logic board
connector.
Important: Be sure
to replace the shim
after you reconnect
the cable. Otherwise,
the cable could work
loose, resulting in no
video.
2010-08-05
MacBook Pro (15-inch, 2.53 GHz, Mid 2009) Take Apart — Optical Drive 165