 Apple Technician Guide - tim.id.au

Replacement
Notes
1 Important: Before
you return a display
assembly, be sure to
• remove clutch cover
• remove AirPort Card
and transfer it to the
new display assembly
• reinstall clutch cover
• remove and transfer
the protective film
from the replacement
display to the
defective display
2 Important: Check the
AirPort cable At the
end of the cable, on
the metal part, there
are two grounding
fingers (two U-shaped
marks). Orient the
grounding fingers so
they are facing the
AirPort card and are
in contact with the
AirPort card
connector. The
grounding fingers
should NOT be facing
you. Inserting the
cable incorrectly will
cause logic board
failure!
With the computer
assembled, test
the AirPort card for
normal operation
2010-08-05
MacBook Pro (15-inch, 2.53 GHz, Mid 2009) Take Apart — Display Assembly 152