 Apple Technician Guide - tim.id.au

2010-08-05
Deep Dive
Check Result Action Code
1. Is optical drive listed in the
device tree for serial-ATA
devices in System Profiler?
2. Verify all connections between
logic board, flex cable, and
optical drive are secure.
Visually inspect cables and
connectors for any debris,
damage, or bent pins. Is
optical drive now listed in
System Profiler?
3. Disconnect user’s optical
drive by lifting SATA cable at
logic board and connecting
a known good optical drive
assembly. Is optical drive now
listed in System Profiler?
4. Install and test user’s optical
drive with replacement SATA
flex cable. Is optical drive now
listed in System Profiler?
5. Inspect optical drive slot
for disc insert/eject. Is there
clearance for disc use?
6. Insert known-good disc and
test user’s optical drive for
acceptance of disc. Does disc
auto eject?
Yes Optical drive has power,
inspect disc acceptance. Go
to step 5.
No Inspect hardware. Go to step
2
Yes Optical drive has power,
inspect disc acceptance. Go
to step 5.
No Replace any damaged cables
and retest. If connections
are good and with no visible
cable damage, go to step 3.
Yes SATA port functional,
reconnect user’s optical drive
& SATA cable. Go to step 4.
X03
No Replace logic board. M19
Yes Cable change resolved issue. X03
No Replace the optical drive.
(Mechanical damage to
optical drive, if found)
Yes Go to step 6.
No Replace damaged optical
drive or system top case that
interferes with disc use.
Yes Replace the optical drive.
(Mechanical damage to
optical drive, if found)
No Go to step 7.
7. Does disc mount to desktop? Yes Go to Eject Test step 8.
No Go to Optical Drive
Read/Write Data Error
troubleshooting page.
MacBook Pro (15-inch, 2.53 GHz, Mid 2009) Symptom Charts — Mass Storage 87
J03
(J06)
J01
(J05)
X13
J03
(J06)