 Apple Technician Guide - tim.id.au

Removal
1 Locate camera cable
shim. With a black
stick, carefully pry
shim off the board.
Note: If you don’t
remove the shim
prior to disconnecting
the cable, you could
damage the cable
pins or logic board
connector.
Important: Be sure
to replace the shim
after you reconnect
the cable. Otherwise,
the cable could work
loose, resulting in no
video.
2 Peel EMI gasket off
camera cable
connector (A).
3 Disconnect camera
cable from logic
board (B). Pull cable
on same horizontal
plane as the logic
board.
2010-08-05
MacBook Pro (15-inch, 2.53 GHz, Mid 2009) Take Apart — Display Assembly 148