manuale per l'installatore - 1/3 tipologie d'installazione - 2/3 software ...

The tick marks the files which
will be simultaneously downloaded
when continuing the ECU programming
clicking Program.
In Picture 4.39 all the three files
are simultaneously downloaded
(FSF, S19 e AAP).
At one time, it is possible to
make the following combinations:
• FSF
• AAP
• FSF + S19
• FSF + S19 + AAP
Sometimes it could be necessary
to update the loader on the
ECU. In this case the program
automatically informs the technician
to do that when he chooses to
execute a guided personalised
programming of the ECU.
To update the loader, click on
LOADER UPDATING (see picture
4.39): the program will open a
page displaying a red writing with
all the indications, according to the
situation of the ECU. Clicking
PROGRAM at the bottom of the
screen, the loader download
starts. At the end of this operation
a message will inform the operation
has been correctly executed
and it is necessary to turn the ignition
key off and then on (picture
4.40).
NOTE:
While updating the ECU loader
you could face the following possibilities:
1.The ECU contains a loader
version less than 106. In this case
the screen is the one of picture
4.40a and the writing in the centre
Pic. 4.39 - Programming from records – simultaneous selection of the three files
Pic. 4.40 - Correctly ended updating
Pic. 4.40a - ECU Loader updating if less than 106
33