LIBRARY ı6ıul 0) - Cranfield University
LIBRARY ı6ıul 0) - Cranfield University
LIBRARY ı6ıul 0) - Cranfield University
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[109] KURKIN, N. S. and DRIKKER, V. E. Evaluation of limiting deviations<br />
during robotised arc welding T joints. Welding International, 4(7),<br />
1990,553-555.<br />
[110] WADSWORTH, P. Assessment of Weld Wire-to-joint Positional Tolerances<br />
for Robotic Arc Welding. Edison Welding Institute, Abstract of Report<br />
MR8703 (http: //www. ewi. org: 2001/cgi-bin/cgicookie? dg3re. 0.5jnOv9.0.1),<br />
1987.<br />
[111] NISSLEY, L. Understanding positioning errors in robotic arc welding<br />
system. Welding Journal, 62(11), 1983,30-37.<br />
[112] YAMADA, T. and TANAKA, 0. Fluctuation of the wire feed rate in gas<br />
metal arc welding. Welding Journal, 66(9), 1987,35-42.<br />
[113] QUINN, T. P. et al. Contact tube wear detection in gas metal arc welding.<br />
Welding Journal, 74(4), 1995,115s-121s.<br />
[114] NOMURA, H. et al. (Eds. ) Welding guide II - Sensors and control systems in<br />
arc welding - The state of the art in Japan. Technical Commission on<br />
Welding Processes, Japan Welding Society, 1991.<br />
[115] USHIO, M. and MAO, W. Sensors for arc welding: advantages and<br />
limitations. Transactions of Japan Welding Research Institute, 23 (2),<br />
1994,135-141.<br />
[116] HANRIGHT, J. Robotic arc welding under adaptive control -a survey of<br />
current technology. Welding Journal, 65(11), 1986,19-24.<br />
[117] SMITH, P. A. An example of FMS robot arc welding. IN: Weston, J. (Ed. )<br />
Exploiting Robots in Arc Welded Fabrication. Cambridge: The Welding<br />
Institute, 1989,124-131.<br />
[118] TAKEUCHI, N. Some kinds of wire ground sensors. IN: Nomura, H. et al.<br />
(Eds. ) Welding guide II Sensors<br />
- and control systems in arc welding<br />
-=<br />
The state of the art in Japan. Technical Commission on Welding Processes,<br />
Japan Welding Society, 1991, II-125 to II-128.<br />
[119] NAKAJIMA, J. et al. Touch sensor and arc sensor for arc welding robots.<br />
IN: Nomura, H. et al. (Eds. ) Welding guide II - Sensors and control<br />
systems in arc welding - The state of the art in Japan. Technical<br />
Commission on Welding Processes, Japan Welding Society, 1991,11-74 to<br />
II-79.<br />
210