Problem Determination and Service Guide - Public Support Login ...

Configuration information and instructions
- Power
Select this choice to view or change power settings.
o Active Energy Manager
This option is not included with the ES7000 Model 7600R G2 server.
o Power Restore Policy
Select this choice to determine the mode of operation to which the server will
be restored after a power outage occurs. You can select Always on,
Always off, or Restore to restore the server the state it was in at the time
of the power outage.
- Operating Modes
Select this choice to select the memory speed or to specify a preset operating
mode to configure the server for maximum power savings, maximum efficiency,
or maximum performance.
o Efficiency mode
Select this choice to maintain the optimal balance between performance and
power consumption. The server generally produces the best performance per
watt while it is in this mode.
o Acoustic mode
Select this choice to configure the server to draw the minimum amount of
power and generate the least noise. Server performance might be degraded
depending on the application that you are running.
o Performance mode
Select this choice to achieve the highest absolute performance for most
server applications. The power consumption in this mode is often higher than
in the Efficiency or the Acoustics mode.
o Custom mode
Select this choice only if you understand the functions of the low-level IMM
settings. This is the only choice that enables you to change the low-level IMM
settings that affect the performance and power consumption of the server.
- Integrated Management Module
Select this choice to view or change the settings for the integrated management
module.
o POST Watchdog Timer
Select this choice to view or enable the POST watchdog timer.
o POST Watchdog Timer Value
Select this choice to view or set the POST loader watchdog timer value.
o Reboot System on NMI
Enable or disable restarting the server whenever a nonmaskable interrupt
(NMI) occurs. Disabled is the default.
7–4 3850 7281–000