Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Symptom<br />
Paper cannot be fed.<br />
Paper jam.<br />
Multiple papers are fed.<br />
Papers are fed at an angle.<br />
Paper is wrinkled.<br />
Is the paper correctly loaded? Load the paper correctly. For labels, transparencies,<br />
postcards, or envelopes, fan them well first to allow air to enter between each sheet<br />
before loading.<br />
Refer to<br />
• “3.2 Loading Paper” (P. 59)<br />
Reason/Action<br />
Is the paper damp? Replace with paper from a new ream.<br />
Refer to<br />
• “3.2 Loading Paper” (P. 59)<br />
Is the correct type of paper used? Load the correct type of paper.<br />
Refer to<br />
• “Usable Paper” (P. 55)<br />
Is the paper tray set correctly? Push the paper tray completely into the printer.<br />
Is the printer placed on a flat location? Place the printer on a stable surface.<br />
Refer to<br />
• Setup and Quick Reference Guide Safety Notes<br />
Are the paper tray guides set in the correct positions? Set the length guide and right<br />
width guide to the correct positions.<br />
Refer to<br />
• “Loading Paper in a Paper Tray” (P. 59)<br />
Have you used any picture postcards? Clean the feed roll.<br />
Refer to<br />
• “Cleaning the Feed Roll” (P. 141)<br />
Papers are fed at more than 1 sheet. Multiple feeding of papers may occur before the<br />
sheets of paper loaded in the tray are used up. Fan the paper to be loaded and load<br />
again. Replenish paper only when all the sheets of the loaded paper are used up.<br />
Envelope is wrinkled.<br />
Envelopes can get wrinkled depending on the type used. Open cover B of this printer<br />
and lift up the levers at both ends of the fuser unit. The wrinkles can be reduced.<br />
After printing the envelope, remember to return the levers to their original positions.<br />
Strange noise.<br />
Is the printer placed on a flat location? Place the printer on a stable surface.<br />
Refer to<br />
• Setup and Quick Reference Guide Safety Notes<br />
Is cover A open? Close cover A securely.<br />
Is the paper tray set correctly? Push the paper tray completely into the printer.<br />
Are there foreign objects inside the printer? Switch off the power and remove any<br />
foreign objects inside the printer. If the object cannot be removed unless the printer is<br />
disassembled, contact our Customer Support Center or your dealers.<br />
5.2 When Problems Occur 107