Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
•Set Time<br />
Enter the time in the format of “hh/mm” (e.g. 12/02).<br />
•Date Format<br />
Select the date display order from “yyyy/mm/dd” (year/month/day), “mm/dd/yyyy” (month/<br />
day/year), and “dd/mm/yyyy” (day/month/year).<br />
•Time Format<br />
Select the time display from 12-hour display and 24-hour display.<br />
•Time Zone<br />
Specify the time zone if required.<br />
•Daylight Saving, Start Date, End Date<br />
Specify summer time if required.<br />
Drum/Toner Life<br />
When it is about time to replace the drum/toner cartridge, a message will appear on the<br />
display. After the message is displayed, you can continue to print normally for about 100<br />
sheets.<br />
Specify whether to stop printing when the drum/toner cartridge needs to be replaced.<br />
[Cancel Print] (default)<br />
Select this to stop printing after the message notifying that it is about time to replace the<br />
drum/toner cartridge was displayed and until it is replaced with a new one.<br />
[Continue Print]<br />
Select this not to stop printing even when the drum/toner cartridge needs replacing. Note<br />
that continuous printing after the replacement time has passed may affect the print image<br />
quality and the printer performance. It is recommended to install a new drum/toner<br />
cartridge.<br />
mm/inch<br />
Specifies the unit that is used on the control panel from [Millimeter (mm)] and [Inch (")].<br />
The default is [Millimeter (mm)].<br />
Printer Settings<br />
[Printer Settings] menu is used to make settings for paper trays such as the auto tray<br />
selection feature.<br />
Substiture Tray<br />
Specifies whether to print on paper loaded in another tray when there is no paper left in the<br />
tray selected by the auto tray selection feature. If you want to replace paper, specify the<br />
paper size.<br />
[Off] (default)<br />
Select this not to replace paper but display a message prompting you to load paper.<br />
[Larger Size]<br />
Select this to replace the paper with a larger size paper before printing in 100%<br />
magnification ratio.<br />
[Nearest Size]<br />
Select this to replace the paper with the nearest size paper before printing. This may shrink<br />
the images automatically as required.<br />
4.2 Description of Menu Items 89
Change language