Download - Fuji Xerox Printers

With Optional Accessories
1
2
8
3
4
7
6
5
No. Name Description
1 Offset catch tray Allows you to stagger the output position for each print job (offset
output). Can be installed to DocuPrint 255/305.
2 Cover D Open this when paper is jammed inside the offset catch tray.
3 Rear tray For reducing the curling of paper when printing heavyweight
paper. Print jobs are output here with the printed side facing up.
Can be installed to DocuPrint 255/305.
4 Duplex unit (Cover C) Enables 2 sided printing. When paper is jammed inside the
duplex unit, it is described as cover C.
5 Rear output tray lever When the rear tray (optional) has been installed, the paper
output location can be switched between it and the center output
tray. Raise the lever to output to the rear tray and lower the lever
to output to the center output tray.
6 A3 universal tray Can install up to two levels of trays. There are two types of tray
modules available: 250 tray and 550 tray.
7 Right detachable cover Remove this when installing optional accessories such as hard
disk and additional memory.
8 Bypass tray By installing this tray instead of tray 1, you can feed paper using
this tray.
1.1 Main Components and Their Functions 13