Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
IPP<br />
Select this to use IPP.<br />
•Port Status<br />
Specifies whether to enable or disable the IPP port when the printer turns on. The default<br />
is [Disable]. To use IPP, select [Enable] for this setting.<br />
Note<br />
• To enable the IPP port, IP address must be specified.<br />
Important<br />
• If the memory is running out when the port is enabled, the port may be disabled automatically. In this<br />
case, you need to disable the port(s) you are not using or change the memory allocation from [Allocate<br />
Memory].<br />
*1 (refer to P. 95)<br />
•Print Mode<br />
Specifies the print data process method (printer language to be used).<br />
[Auto] (default)<br />
Select this to make the printer automatically detect the printer language being used in the<br />
data received from a computer and perform printing based on the detected data.<br />
[PCL] [PS] [HP-GL/2] [TIFF]<br />
Select this to process the data received from a computer as the specified data type. [PS] is<br />
displayed only when the PostScript software kit (optional) is installed.<br />
*2 (refer to P. 95)<br />
•PJL<br />
This printer supports PJL commands that are independent from any printer languages. The<br />
PJL commands are used to control print jobs and are required for printing using a printer<br />
driver. In this menu, specify whether to enable or disable the PJL commands sent from a<br />
computer. PJL commands allow you to specify the printer language to be used for the next<br />
data even while the printer is using a different printer language at the time. Normally, it<br />
should be set to [Enable]. The default is [Enable].<br />
•Access Control<br />
Specifies whether to enable or disable the access right control when canceling/deleting a<br />
print job or setting/releasing the printer to/from pause state. The default is [Disable].<br />
•DNS<br />
Specifies whether to use the name registered in DNS (Domain Name System) in order to<br />
recognize the printer. The default is [Enable], which means the DNS name is available. If<br />
[Disable] is selected, the IP address is used for recognizing the printer.<br />
*3 (refer to P. 95)<br />
•Add Port No.<br />
Specify 0, 80, or a value between 8000 and 9999 for the additional port number. The default<br />
is [80].<br />
•Connect Time-Out<br />
Specifies the time interval for disconnection when no further data is received. You can<br />
specify a value between 0 and 65535 seconds in increments of 1 second. The default is [60<br />
Secs].<br />
•TBCP Filter<br />
Specifies whether to enable or disable the TBCP filter when processing PostScript data.<br />
This item is displayed only when the PostScript software kit (optional) is installed. The<br />
default is [Disable].<br />
4.2 Description of Menu Items 81