Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
•IPP Spool<br />
[Off] (default)<br />
Select this if you do not want to perform spool processing. When IPP data from a computer<br />
is being processed, data from another computer cannot be received via the same interface.<br />
Specify the IPP specific receive buffer memory capacity between 64 and 1024 KB in<br />
increments of 32 KB. The default is [256K].<br />
[Hard Disk]<br />
Select this to perform spool processing. This uses the hard disk (optional) as the receive<br />
buffer for spool processing.<br />
Note<br />
• [IPP Spool] is displayed when the hard disk (optional) is installed. [IPP Memory] is displayed when the<br />
hard disk is not installed.<br />
Init/Del Data<br />
[Init/Del Data] menu is used to delete data such as the printer setting values stored in the<br />
NV memory and the form data registered in this printer. It is also used to initialize the hard<br />
disk and meter reports.<br />
Note<br />
• Initialization will revert each setting value to default. Refer to “4.3 Menu List” (P. 96) for details.<br />
NVM<br />
Select this to initialize the NV memory. The NV memory is a nonvolatile memory that stores<br />
the printer settings even after power off.<br />
Initializing the NV memory will revert the value for each item to default.<br />
Hard Disk<br />
Select this to initialize the hard disk (optional). The data to be deleted during initialization<br />
includes the additional fonts, the HP-GL and HP-GL/2 forms, and the SMB folders. The<br />
secure print documents, sample print documents, delayed print documents, and their logs<br />
will not be deleted. This item is displayed when the hard disk is installed.<br />
Print Meter<br />
Select this to initialize the printer meter reports. Initialization will change the meter count to<br />
“0”.<br />
Refer to<br />
• “Initializing Print Meter Data” (P. 138)<br />
Form<br />
If there are no forms registered, a message saying “Not registered” will be displayed.<br />
•Delete PCL Forms<br />
Select this to delete the forms for PCL emulation. All the registered PCL forms are deleted.<br />
Font<br />
If there are no registered fonts, “Not registered” message will be displayed.<br />
•Delete PCL Fonts<br />
Select this to delete the fonts for PCL emulation. All the downloaded PCL fonts are deleted.<br />
94 4 Settings on the Control Panel
Change language