Download - Fuji Xerox Printers

Error code
Reason/Action
016-721 Error in print processing. This may be due to the following reasons.
• When [Paper Priority] of [Printer Settings] in the common menu has been set to [Not Selected]
for all paper, a job is sent to print using auto paper supply.
To print a job using auto paper supply, configure priority settings for any paper. When custom
paper is selected, [Paper Priority] settings will be automatically changed to [Not Selected].
Refer to
• Setting of paper priority: “Printer Settings” (P. 89)
016-726 Printer language cannot be selected automatically although [Print Mode] has been set to [Auto] on
the control panel.
Select the printer language using the control panel or command.
016-728 Unsupported Tags are found in the TIFF files.
Check the print data.
016-729 Cannot print as color count and resolution of the TIFF data exceed the valid range.
Change the color count and resolution of TIFF files and print again.
016-730 Detected unsupported commands.
Check print data, delete the error-causing commands, and print again.
016-731 Cannot print as the TIFF data has been cut.
Print again.
016-732 The specified form is not registered.
Register the form, and print again.
016-744 Cannot print PDF file as it contains features that are not supported in this printer.
Open PDF file using Adobe Acrobat Reader and select [Print] from the [File] menu to print.
016-748 Cannot print due to insufficient hard disk space.
Reduce the number of print pages such as splitting the print data or printing one copy at a time for
multiple copies.
Also, increase the free space by deleting unnecessary data in the hard disk (optional).
016-749 PJL command syntax error detected.
Check the print settings or correct the PJL command.
016-751 Cannot print as the PDF file is using ContentsBridge.
Open PDF file using Adobe Acrobat Reader and select [Print] from the [File] menu to print.
016-752 Cannot print PDF file by using the PDF Bridge feature due to insufficient memory.
When using the ContentsBridge Utility, change the [Print Mode] settings in the [ContentsBridge]
dialog box to the following:
• When [High Quality] is selected, change to [Standard].
• When [Standard] is selected, change to [High Speed].
Note
• Refer to “Using ContentsBridge Utility to Print PDF” (P. 41).
• When the PDF files are being printed directly without using the ContentsBridge Utility, change
the [PDF] setting on the control panel referring “PDF” (P. 71).
016-753 Password for the PDF file is different from the one set in the printer or in the ContentsBridge
Utility.
Set the correct password in the printer or in the ContentsBridge Utility, and print again.
Note
• Refer to “Using ContentsBridge Utility to Print PDF” (P. 41) about the ContentsBridge Uttility.
• When the PDF files are being printed directly without using the ContentsBridge Utility, change
the [PDF] setting on the control panel referring “PDF” (P. 71).
016-754 PDF file contains objects that are using LZW compression.
Print the file by the following methods:
• Open the PDF file using Adobe Acrobat Reader and select [Print] from the [File] menu to print.
• Use PostScript features to print.
5.4 Message List 117