Download - Fuji Xerox Printers

More documents

Recommendations

Info

PCL Sets the PCL emulation mode. Paper Tray Specifies the paper tray to be used for printing. Candidate values are as follows: [Auto] (default) This searches for the tray loaded with the paper size specified in [Output Size] and automatically feeds paper from it. [Tray 1] [Tray 2] [Tray 3] [Tray 4] [Tray 1 (Bypass)] Important • If any tray from [Tray 1] to [Tray 4] is selected, the paper size loaded in the tray will become the paper size for printing. Note • If [Auto] is selected and paper of the same size is loaded in multiple trays in the same direction, paper will be fed from the tray specified as higher priority in [Tray Priority] under [Printer Settings] of [Admin Menu]. The default of [Tray Priority] is Tray 1 (highest priority) > Tray 2 > Tray 3 (optional) > Tray 4 (optional) (lowest priority). If paper of the same size is loaded in multiple trays in different directions, paper loaded in landscape direction will be used first. • [Tray 3] and [Tray 4] will not be displayed when those optional trays are not installed. • [Tray 1 (Bypass)] will be displayed only when the bypass tray (optional) is installed. If it is displayed, you cannot specify [Tray 1]. Output Size Specifies the paper size to be printed. Candidate values are as follows: [A4] [A3] [A5] [B4] [B5] [8.5×14] (Legal) [8.5×11] (Letter) Output Size (Bypass) Specifies the paper size to be loaded in the bypass tray (optional). Candidate values are as follows: [A4] (default) [A3] [A5] [B4] [B5] [8.5×14] (Legal) [8.5×11] (Letter) [8.5×13] [11×17] [7.25×10.5] Output Tray Specifies the output tray for printed paper. [Center Tray] (default) [Rear Tray] [OffsetCatchTray] Note • [Rear Tray] is available only when the rear tray (optional) is installed. • [OffsetCatchTray] is available only when the offset catch tray (optional) is installed. 74 4 Settings on the Control Panel
Orientation The paper printing direction can be selected from [Portrait] and [Landscape]. The default is [Portrait]. 2 Sided Print Specifies whether to perform 2 sided printing. The default is [Off]. When you select [On], you can select [Long Edge Flip] or [Short Edge Flip] as the binding direction. Note • You can set this item only when the duplex unit (optional) is installed. Font Specifies the font used. The default is [Courier]. Symbol Set Specifies the font for symbols. The default is [ROMAN-8]. Font Size Specifies the font size. The default is [12.00]. You can specify a value between 4.00 and 50.00 in increments of 0.25. Font Pitch Specifies the character spacing. The default is [10.00]. You can specify a value between 6.00 and 24.00 in increments of 0.01. Form Lines Specifies the form line (the number of lines per form). The default is [64]. You can specify a value between 5 and 128 in increments of 1. Quantity Specifies the copies to be printed between 1 to 999. The default is [1 Sets]. ImageEnhance Selects whether to perform image enhancement. Image enhancement is a feature that makes the boundary line between black and white smoother to decrease jags and enhance the visual appearance. The default is [On]. HexDump Specifies whether to print the data sent from a computer in the ASCII code corresponding to the hexadecimal notation format in order to check the data contents. The default is [Disable]. Draft Mode Specifies whether to print in draft mode. The default is [Disable]. Line Termination Sets the line termination. The default is [Off]. 4.2 Description of Menu Items 75
Page 1 and 2:
DocuPrint 205/255/305 User Guide
Page 3 and 4:
Preface Thank you for choosing this
Page 5 and 6:
Types of Manuals Manuals Bundled Wi
Page 7 and 8:
3 About Paper .....................
Page 9 and 10:
Contents of the Setup and Quick Ref
Page 11 and 12:
Illegal Copies and Printouts Copyin
Page 13 and 14:
With Optional Accessories 1 2 8 3 4
Page 15 and 16:
Control Panel 1 2 3 5 4 6 9 8 7 No.
Page 17 and 18:
1.2 Switching On and Off the Power
Page 19 and 20:
Canceling Printing of All Print Dat
Page 21 and 22:
2 Printing 2.1 Printing From the Co
Page 23 and 24: Loading Envelopes in Bypass Tray No
Page 25 and 26: 2.3 Printing on Transparencies Load
Page 27 and 28: 2.4 Printing on Custom Size Paper/L
Page 29 and 30: Setting Custom Paper Sizes Before p
Page 31 and 32: 3. Click the [Tray/Output] tab. 4.
Page 33 and 34: 3. From [Job Type] on the [Basic] t
Page 35 and 36: 2.6 Print After Checking Printing R
Page 37 and 38: At the Control Panel This section e
Page 39 and 40: 4. Set the time to start printing b
Page 41 and 42: Using ContentsBridge Utility to Pri
Page 43 and 44: Printing PDF File (for Windows) 1.
Page 45 and 46: Printing PDF File (for Macintosh) T
Page 47 and 48: Printing a PDF File Without Using C
Page 49 and 50: 3. Click [Services] and on the disp
Page 51 and 52: Configuring the E-mail Environment
Page 53 and 54: Sending E-mails Attachments That Ca
Page 55 and 56: 3 About Paper 3.1 About Paper Usabl
Page 57 and 58: Special Media The following types o
Page 59 and 60: 3.2 Loading Paper Loading Paper in
Page 61 and 62: Loading Paper in the Bypass Tray (O
Page 63 and 64: 3.3 Setting Custom Paper Sizes When
Page 65 and 66: 4 Settings on the Control Panel 4.1
Page 67 and 68: Changing Menu Settings Basic Operat
Page 69 and 70: Continued from previous page System
Page 71 and 72: 4.2 Description of Menu Items This
Page 73: Layout Select this to set the print
Page 77 and 78: *3 (refer to P. 95) •Auto Eject T
Page 79 and 80: *3 (refer to P. 95) •Connect Time
Page 81 and 82: IPP Select this to use IPP. •Port
Page 83 and 84: •Adobe Protocol Specifies the com
Page 85 and 86: TCP/IP Settings •Get IP Address S
Page 87 and 88: *3 (refer to P. 95) Panel Settings
Page 89 and 90: •Set Time Enter the time in the f
Page 91 and 92: Paper Size Specifies the paper size
Page 93 and 94: Buffer Size For each interface, spe
Page 95 and 96: Stored Documents Select this to del
Page 97 and 98: Continued from previous page Contin
Page 99 and 100: From P. 97 From P. 97 4.3 Menu List
Page 101 and 102: 5 Troubleshooting 5.1 When Paper Ja
Page 103 and 104: Pulling out paper trays 1. Pull out
Page 105 and 106: Cannot print. Symptom Reason/Action
Page 107 and 108: Symptom Paper cannot be fed. Paper
Page 109 and 110: Symptom Printed image smudges when
Page 111 and 112: 5.4 Message List Message List (Alph
Page 113 and 114: Message Open Cover C and remove pap
Page 115 and 116: Message SeeBypassSetKey xxxx XXXX C
Page 117 and 118: Error code Reason/Action 016-721 Er
Page 119 and 120: Error code Reason/Action 116-748 No
Page 121 and 122: For Windows NT 4.0/Windows 2000/Win
Page 123 and 124: 5.6 Mail Related Troubles This sect
Page 125 and 126:
Replacing the Drum/Toner Cartridge
Page 127 and 128:
6.2 Printing Reports/Lists This sec
Page 129 and 130:
Printing Reports/Lists Print the re
Page 131 and 132:
Browsers • Netscape Communicator
Page 133 and 134:
IP Filter Feature via IP Address Li
Page 135 and 136:
Setting the E-mail Environment (at
Page 137 and 138:
6.5 Checking Printed Pages This sec
Page 139 and 140:
6.6 Cleaning the Printer This secti
Page 141 and 142:
Cleaning the Feed Roll When feeding
Page 143 and 144:
6.7 When Moving the Printer Carry o
Page 145 and 146:
Item Contents Paper size Tray 1 Sta
Page 147 and 148:
Item Contents Weight (including dru
Page 149 and 150:
Consumables This section explains h
Page 151 and 152:
A.4 How to Obtain Product Informati
Page 153 and 154:
PostScript Printer Driver Memory ca
Page 155 and 156:
Usable Paper The usable sizes of pa
Page 157 and 158:
BitPer Sample Photometric Interpret
Page 159 and 160:
Settings on the Printer Driver The
Page 161 and 162:
DNS Abbreviation of Domain Name Sys
Page 163 and 164:
PDF File In this manual, PDF file r
Page 165 and 166:
Index Symbols, Numerics < > < > < >
Page 167 and 168:
U upgrade firmware . . . . . . . .
Page 169:
DocuPrint 205/255/305 User Guide Hu
show all

Download - Fuji Xerox Printers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?