Download - Fuji Xerox Printers

TCP/IP Settings
•Get IP Address
Specifies whether to automatically or manually retrieve the necessary information for using
TCP/IP (IP address, subnet mask, and gateway address) from the DHCP (Dynamic Host
Configuration Protocol) server with AutoIP feature, DHCP server, BOOTP, or RARP. For
the addresses you need to set manually, contact your network administrator. The default is
[DHCP/Autonet].
Note
• Changing the setting from [DHCP/Autonet], [DHCP], [BOOTP], or [RARP] to [Manual] may display the IP
address setting screen. If it appears, specify the IP address manually.
•IP Address, Subnet Mask, Gateway Address *3 (refer to P. 95)
These items are used to check the addresses that have been obtained automatically or to
specify addresses manually. Enter the address in the format of xxx.xxx.xxx.xxx. You can
specifies values in the range of 0 to 255 for xxx.
Important
• Incorrect IP address may affect the overall network.
• If you enter an incorrect address when setting the subnet mask (e.g. when “0” is set for the bit in the
middle), the address returns to the previous values even if you press the button after setting
values. You cannot move to other menu items until you have set the correct values.
• Set the address only when you have to explicitly specify the gateway address. You do not need to set
the address if the gateway address can be set automatically.
InternetServices
Specifies whether to use Internet Services.
When [Enable] is specified, you can use CentreWare Internet Services to display the printer
and job status on a web browser and change the printer settings. The default is [Enable].
Note
• To enable Internet Services, you need to specify both the IP addresses of a computer and the printer.
WINS Server
•Get DHCP Address
Specifies whether to automatically retrieve the IP address of WINS server that is required
for using WINS (Windows Internet Name Service). If you do not select automatic retrieval
of the IP address, contact your network administrator for manual specification of the
addresses. The default is [On].
Note
• Changing from [On] to [Off] may display the IP address setting screen. If it appears, specify the IP
address manually.
*3 (refer to P. 95)
•Primary IP, Secondary IP
These items are used to check the addresses that have been automatically obtained or to
specify the addresses manually. Enter the address in the format of xxx.xxx.xxx.xxx. You can
set values between 0 and 255 for xxx. If the primary IP address is invalid, the secondary IP
address will become invalid too.
Important
• Incorrect IP address may affect the overall network.
4.2 Description of Menu Items 85