Download - Fuji Xerox Printers

Unusable Paper
Using the following types of paper might cause paper jams, malfunctions or damage to the
machine. Do not use them.
• Fuji Xerox full-color transparencies (example: V556, V558, V302)
• Paper exclusively for ink-jet printer use
• Paper that is too thick or thin
• Paper that has been printed on before (including color printing)
• Wrinkled, folded or torn paper
• Wet paper
• Curled paper
• Paper with static electricity
• Adhesive paper
• Postcards with pictures
• Paper with special coatings
• Treated colored paper
• Paper using ink that will run at a temperature of 150 °C
• Thermal paper
• Carbon paper
• Paper with staples, paper clips, ribbons or tape
• Paper with rough surfaces such as pulp paper, or fibrous paper
• If acid paper is used, the characters might appear fuzzy. Replace it with alkaline paper.
• Envelopes that are not flat or have metal fasteners
• Labels that do not fully cover the adhesive backing
Storing and Handling Paper
Even for suitable papers, poor storage conditions may lead to a change in the paper quality,
paper jams, poor print quality and machine breakdown. Take note of the following points
when storing paper:
• Store paper in the following locations: Temperature of 10 - 30 °C with a relative humidity
of 30 - 65%
• After opening a ream of paper, use the original cover sheets to wrap up the paper not
used and store it in a cabinet or a location with low humidity.
• Do not let the paper stand but store it in a flat location.
• Ensure that the paper is stored properly without being bent or curled.
• Store the paper in a location not exposed to direct sunlight.
58 3 About Paper