Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[Bypass Feed]<br />
Select this to print on paper loaded in the bypass tray. You can select this only when the<br />
bypass tray (optional) is installed.<br />
Note<br />
• If a computer issues the instruction about paper selection, it overwrites this setting.<br />
Paper Type<br />
Specifies the paper type to be loaded in trays. The default is [Plain] for all trays. The names<br />
specified in [Paper Name] will be displayed for Customs 1 to 5.<br />
•Tray 1 to Tray 4<br />
Select from [Plain], [Recycled], [Heavyweight 1], [Heavyweight 2], [Transparency], and<br />
[Custom 1] to [Custom 5].<br />
•Tray 1 (Bypass)<br />
Select from [Plain], [Recycled], [Heavyweight 1], [Transparency], and [Custom 1] to<br />
[Custom 5].<br />
Note<br />
• [Tray 1 (Bypass)] will be displayed when the bypass tray (optional) has been installed. If it is displayed,<br />
you cannot specify [Tray 1].<br />
Paper Priority<br />
Specifies the priority of the paper type loaded in the tray specified with the auto tray<br />
selection feature. The names specified in [Paper Name] will be displayed for Customs 1 to<br />
5.<br />
•Plain, Recycled, Heavyweight 1, Heavyweight 2, Custom 1 to Custom 5<br />
Select the priority of each paper type from [Not Selected] and [1] to [9]. You can specify the<br />
same priority for different paper types. In this case, the paper tray is selected based on the<br />
settings in [Tray Priority]. If you specify [Not Selected] for a paper type, the tray loaded with<br />
the paper type will be excluded from the targets of auto tray selection. The default is [1] for<br />
plain paper, [2] for recycled paper, and [Not Selected] for the others.<br />
Refer to<br />
• “Automatic Tray Selection” (P. 62)<br />
Tray Priority<br />
Specifies the priority of trays 1 to 4 for auto tray selection when the optional trays are<br />
installed. The bypass tray is excluded from the targets of auto tray selection.<br />
•1 to 3<br />
Specify a priority of [1] to [3] for each tray. You cannot set the same tray to different priority<br />
numbers. That means the trays that can be set [2] are other than the tray specified in [1],<br />
and the trays that can be set [3] are other than the trays specified in [1] and [2]. The<br />
remaining trays are set to [4]. The default priority is tray 1 (highest priority) to tray 4 (lowest<br />
priority).<br />
90 4 Settings on the Control Panel
Change language