User's Manual AXF Magnetic Flowmeter Integral ... - Yokogawa
User's Manual AXF Magnetic Flowmeter Integral ... - Yokogawa
User's Manual AXF Magnetic Flowmeter Integral ... - Yokogawa
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8. EXPLOSION PROTECTED TYPE INSTRUMENT<br />
Maximum surface temperature:<br />
Maximum Surface<br />
Temperature<br />
T75°C (+167°F)<br />
T85°C (+185°F)<br />
T100°C (+212°F)<br />
T110°C (+230°F)<br />
Maximum Process<br />
Temperature<br />
+70°C (+158°F)<br />
+85°C (+185°F)<br />
+120°C (+248°F)<br />
+130°C (+266°F)<br />
T0802.EPS<br />
Ambient Temp.:–40°C to +60°C (–40°F to +140°F)<br />
(Remote Flowtube)<br />
CENELEC ATEX (KEMA) Flameproof Type<br />
Group: II<br />
Category: 2G<br />
EEx dme [ia] IIC T6...T3<br />
Electrode Circuit Um: 250 Vac/dc<br />
Excitation Circuit: 170V max<br />
Enclosure: IP66, IP67<br />
Temperature Class:<br />
(2) Electrical Connection<br />
The type of electrical connection is stamped near the<br />
electrical connection port according to the following<br />
codes.<br />
(<strong>Integral</strong> <strong>Flowmeter</strong>)<br />
Screw Size<br />
ISO M20x1.5 female<br />
ANSI 1/2NPT female<br />
(Remote Flowtube)<br />
Screw Size<br />
ISO M20x1.5 female<br />
ANSI 1/2NPT female<br />
Marking<br />
M<br />
A<br />
Marking<br />
M<br />
A<br />
Temperature<br />
Class<br />
Maximum Process<br />
Temperature<br />
Minimum Process<br />
Temperature<br />
T6<br />
T5<br />
T4<br />
T3<br />
+70°C (+158°F)<br />
+85°C (+185°F)<br />
+120°C (+248°F)<br />
+150°C (+302°F)<br />
–40°C (–40°F)<br />
–40°C (–40°F)<br />
–40°C (–40°F)<br />
–40°C (–40°F)<br />
T0803.EPS<br />
Ambient Temp.: –40°C to +60°C (–40°F to +140°F)<br />
CENELEC ATEX (KEMA) Type of Protection<br />
“Dust”<br />
Group: II<br />
Category: 1D<br />
Electrode Circuit Um: 250 Vac/dc<br />
Excitation Circuit: 170V max<br />
Enclosure: IP66, IP67<br />
Maximum surface temperature:<br />
(3) Installation<br />
WARNING<br />
F0801.EPS<br />
•All wiring shall comply with local installation<br />
requirements and local electrical code.<br />
• In hazardous locations, the cable entry devices<br />
shall be of a certified ATEX flameproof type,<br />
suitable for the conditions of use and correctly<br />
installed.<br />
• Unused apertures shall be closed with suitable<br />
flameproof certified blanking elements. (The<br />
plug attached is flameproof certified.)<br />
Maximum Surface<br />
Temperature<br />
T75°C (+167°F)<br />
T85°C (+185°F)<br />
T100°C (+212°F)<br />
T115°C (+239°F)<br />
Maximum Process<br />
Temperature<br />
+70°C (+158°F)<br />
+85°C (+185°F)<br />
+120°C (+248°F)<br />
+150°C (+302°F)<br />
T0804.EPS<br />
Ambient Temp.:–40°C to +60°C (–40°F to +140°F)<br />
(4) Operation<br />
(<strong>Integral</strong> <strong>Flowmeter</strong>)<br />
WARNING<br />
• After de-energizing, delay 20 minutes before<br />
opening.<br />
• Take care not to generate mechanical spark<br />
when access to the instrument and peripheral<br />
devices in hazardous locations.<br />
8-2<br />
IM 01E20D01-01E