User's Manual AXF Magnetic Flowmeter Integral ... - Yokogawa

6. OUTLINE
Table of Optional Specifications (Size 500 mm (20 in.) to 2600 mm (104 in.)) (continued)
: Available –: Not available
Applicable Model
Item
Specifications
General
Remote
Flowtube
Submersible
Remote
Flowtube Code
AXF***G-N
AXF***W-N
Hydrostatic Test
The test verifies the absence of leaks by applying the following water pressures (which are determined
under process connection conditions) to lining for ten minutes. Test results are described in the Note column
of a test certificate(QIC).
Process Connection:
Water Pressure:
JIS 10K, ANSI Class 150, DIN PN10 1.5 MPa
JIS F12
1.25 MPa
T01
Calibration Certificate
Level 2: The Declaration and the Calibration Equipment List are issued. L2
Level 3: The Declaration and the Primary Standard List are issued. L3
Level 4: The Declaration and the Yokogawa Measuring Instruments Control System are issued. L4
Five-point Calibration
in User-specified
Span
A flow test at 0, 25, 50, 75, and 100% of the user-specified span is performed instead of the flow test of the
standard 2m/s span and a test certificate (QIC) is submitted. Specify the span (100% flow span) whose
corresponding flow velocity lies between 0.5 to 10 m/s and that is less than the maximum line capacity.
Selectable range of flow rate span is showing below.
Size : mm
Selectable range of flow rate span : m 3 /h
(in.)
(Flow rate span velocity : m/s)
500 (20)
354 (0.5) to 7068 (10.00)
600 (24)
509 (0.5) to 8200 (8.06)
700 (28)
693 (0.5) to 8200 (5.92)
800 (32)
905 (0.5) to 8200 (4.53)
900 (36)
1146 (0.5) to 8200 (3.58)
1000 (40)
1414 (0.5) to 8200 (2.90)
1100 (44)
1711 (0.5) to 8200 (2.40)
1200 (48)
2036 (0.5) to 8200 (2.01)
1350 (54)
2577 (0.5) to 41300 (8.01)
1500 (60)
3181 (0.5) to 41300 (6.49)
1600 (64)
3620 (0.5) to 41300 (5.71)
1800 (72)
4581 (0.5) to 41300 (4.51)
2000 (80)
5655 (0.5) to 41300 (3.65)
2200 (88)
6843 (0.5) to 41300 (3.02)
2400 (96)
8143 (0.5) to 41300 (2.54)
2600 (104)
9557 (0.5) to 41300 (2.16)
SC
T26-6.EPS
6-33
IM 01E20D01-01E