Synchronous Generators BG 132 and BG 160
Synchronous Generators BG 132 and BG 160
Synchronous Generators BG 132 and BG 160
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Synchronous</strong> <strong>Generators</strong> <strong>BG</strong> <strong>132</strong> / <strong>BG</strong> <strong>160</strong><br />
Chapter 2, Description<br />
• Generator with a control box mounted (only applicable for 8 kVA <strong>and</strong> 13 kVA<br />
versions):<br />
In the st<strong>and</strong>ard version the control box optionally mounted on the generator<br />
contains the generator governor, a suppression filter, the sockets for<br />
connecting the loads as well as an all-pole circuit breaker for protecting the<br />
installed sockets against overcurrent <strong>and</strong> short-circuit. As additional options<br />
an hour meter <strong>and</strong> an insulation monitoring can be installed. Further<br />
information about the optional control box can be found in section 2.8 on<br />
page 23.<br />
Terminal box<br />
Drive shaft<br />
Mounting profile<br />
(all around with 45°<br />
spacing)<br />
Drain hole for<br />
condensation water<br />
(if available)<br />
Angle brackets<br />
(fitted on both sides)<br />
Cooling<br />
profiles<br />
Cooling air intake<br />
Fan impeller shroud<br />
Drain hole for condensation water<br />
(if available)<br />
Figure 4<br />
Two-bearing generator, size <strong>BG</strong> <strong>132</strong> with terminal box<br />
20 Issue date: August 2002
Change language