Synchronous Generators BG 132 and BG 160
Synchronous Generators BG 132 and BG 160
Synchronous Generators BG 132 and BG 160
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Synchronous</strong> <strong>Generators</strong> <strong>BG</strong> <strong>132</strong> / <strong>BG</strong> <strong>160</strong><br />
Chapter 8, Removal<br />
8. Detach the special hexagon nut (Figure 33/1) from the generator shaft.<br />
9. Remount the carbon brushes holder (Figure 33/4) according to the<br />
descriptions on page 90 (section 6.4.1) into the generator <strong>and</strong> reconnect the<br />
connection cables.<br />
10. Insert the special wooden chock serving as transport locking for the rotor.<br />
11. Remount the sleeve (Figure 33/6) <strong>and</strong> fasten it by tightening the two<br />
screws (5).<br />
12. Remount the fan impeller (Figure 33/2) <strong>and</strong> secure it on the generator shaft<br />
by means of the feathered key (against twisting) <strong>and</strong> the sawing ring.<br />
13. Remount the fan impeller shroud (Figure 33/4).<br />
6<br />
5<br />
1<br />
2<br />
3<br />
4<br />
Figure 33 Removal of single-bearing brush-type generators (2)<br />
96 Issue date: August 2002
Change language