Synchronous Generators BG 132 and BG 160
Synchronous Generators BG 132 and BG 160
Synchronous Generators BG 132 and BG 160
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Synchronous</strong> <strong>Generators</strong> <strong>BG</strong> <strong>132</strong> / <strong>BG</strong> <strong>160</strong><br />
Chapter 4: 4.4 Permissible mounting positions <strong>and</strong> drain holes for cond. water<br />
4.4.2 Permissible mounting positions for two-bearing generators<br />
(<strong>BG</strong> <strong>132</strong> <strong>and</strong> <strong>BG</strong> <strong>160</strong>)<br />
The generator has to be mounted on a horizontal flat<br />
base st<strong>and</strong>ing on its angle brackets, as shown in<br />
the accompanying figure.<br />
When mounted in normal position, the terminal box<br />
is positioned on the top of the generator (or the<br />
cable lead-out or the control box, depending on the<br />
version).<br />
It is also possible to install the generator turned by<br />
45° or 90° to the left or to the right, as shown in the<br />
accompanying figure. For this purpose, the angle<br />
brackets have to be removed <strong>and</strong> mounted again to<br />
the corresponding mounting profiles.<br />
ok<br />
ok<br />
ok<br />
No other mounting position is permitted!<br />
no<br />
no<br />
no<br />
32 Issue date: August 2002