2110XP Ammonia Analyzer User Guide (1574 Kb) - Thermo Scientific

Instrument Operation
Default User Action Marquee
Scrolling
Main Display
top line
bottom line
Notes
mAMP
mAMP
(flashing)
SEL
SCrn
Press
to set analog output parameters
4-20 Select 0-20 or 4-20 4-20
Use / to toggle between 4-20 or
0-20 output values
(Flashing)
Select 0-20 or 4-20 4-20 or 0-20
(Flashing)
Press to set analog output and advance
to next screen for sensing output (SOUt) for
ammonia
LOG
Use / to toggle
between LOG and LIn output
SELECT LOG OR LINEAR
OUTPUT
SOUt
LOG or LIn
(Flashing)
The default
scale values
the same for
both LOG and
LIn
Press
to set SOUt low (LO) limit
1.0 ppb mA SENSOR OUTPUT LOW
VALUE
Use
to move decimal and ppm / ppb
Use / to set digit values
Use
to move to set each digit
Use / to set values of remaining
digits for SOUt low value
Press to accept value and advance to next
screen to set SOUt high (HI) limit
mA SENSOR OUTPUT LOW
VALUE
mA SENSOR OUTPUT LOW
VALUE
100 ppb mA SENSOR OUTPUT HIGH
VALUE
Use
to move decimal and ppm / ppb
Use / to set digit values
Use
to move to set each digit
Use / to set values of remaining
digits for SOUt high value
mA SENSOR OUTPUT HIGH
VALUE
mA SENSOR OUTPUT HIGH
VALUE
LO
#.# ppb
(Flashing)
LO
# # #. #
(Flashing digit will change)
LO
# # #. #
(Flashing digit will change)
HI
#.# ppb
(Flashing)
HI
# # #. #
(Flashing digit will change)
HI
###. #
(Flashing digits will
change)
Thermo Scientific Orion 2110XP Ammonia Monitor User Guide
III-21