06.11.2014 Views

2110XP Ammonia Analyzer User Guide (1574 Kb) - Thermo Scientific

2110XP Ammonia Analyzer User Guide (1574 Kb) - Thermo Scientific

2110XP Ammonia Analyzer User Guide (1574 Kb) - Thermo Scientific

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

General Information<br />

Principles of Operation<br />

The sample enters the <strong>Thermo</strong> <strong>Scientific</strong> Orion <strong>2110XP</strong> ammonia monitor<br />

and passes through the inlet valve, bypass/needle valve, inlet filter, pressure<br />

regulator, flow meter and into the restrictor tubing. The sample then passes<br />

through the flow cell manifold into a reagent bottle through a diffusion<br />

tubing assembly where pH adjustment takes place. The pH-adjusted<br />

sample then flows back through the manifold into the flow cell as air is<br />

introduced from the air pump to ensure proper mixing and fast response.<br />

The sample then flows into an atmospheric drain via the diverter valve.<br />

K E Y<br />

Electric<br />

Monitor<br />

Reference Solution<br />

Air Pump<br />

Fluid Path<br />

Fluid Restrictor Tubing<br />

Air Path<br />

Reference Solution Path<br />

DIPA Overflow Path<br />

Diffusion Tubing<br />

1 2 3 4 5<br />

Power<br />

4-20mA Output<br />

Restrictor Tubing<br />

Air Filter<br />

Check<br />

Valve<br />

Air Inlet<br />

Flowmeter<br />

Pressurizes flow cell<br />

to initiate siphoning<br />

Sense<br />

TEMP<br />

REF<br />

Calibration<br />

Port<br />

Safety Drain for<br />

Reagent Overflow<br />

Calibration Level<br />

Regulator<br />

Valve<br />

Measure Level<br />

Bypass / Needle<br />

Valve & Filter<br />

Cal<br />

Inlet Valve<br />

Sample<br />

Valve<br />

Flow Cell Block<br />

Reagent Manifold<br />

Valve Positions<br />

Calibration Mode - PUSH<br />

Sample/Measure Mode - PULL<br />

Diffusion Tube<br />

Reagent<br />

Reagent Bottle<br />

Main Feed<br />

Figure I-1<br />

Orion <strong>2110XP</strong> Schematic<br />

Drain<br />

<strong>Thermo</strong> <strong>Scientific</strong> Orion <strong>2110XP</strong> <strong>Ammonia</strong> Monitor <strong>User</strong> <strong>Guide</strong><br />

I-3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!