BaseStation 3200 User Manual â 11.7.5.15 ... - Baseline Systems
BaseStation 3200 User Manual â 11.7.5.15 ... - Baseline Systems
BaseStation 3200 User Manual â 11.7.5.15 ... - Baseline Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>BaseStation</strong> <strong>3200</strong> Advanced Irrigation Controller <strong>Manual</strong><br />
• Flow sensor biCoders for connection to third-party flow sensors and master valves<br />
• Pause biCoder – compatible with any standard normally closed pause device such as a rain switch or a wind<br />
switch<br />
• Air temperature biCoder<br />
• Pause button (also called a “coach’s button”)<br />
• Pump relay biCoder<br />
• Lightning arrestor/surge suppression devices<br />
You can expand every <strong>BaseStation</strong> <strong>3200</strong> to support up to 200 zones using virtually any combination of two-wire<br />
and conventional wiring.<br />
Total Supported Devices and Limits<br />
The following table lists the total numbers of devices by type that can be connected to a <strong>BaseStation</strong> <strong>3200</strong>. The<br />
<strong>BaseStation</strong> <strong>3200</strong> can communicate with a maximum of 110 devices (device loads) on the two-wire path within the<br />
layout and length limits outlined later in this section.<br />
Two-Wire Device Type Total Device Loads<br />
Valve biCoders 200 1 per biCoder<br />
5200R series biCoders 20 2 per biCoder<br />
biSensors 25 1<br />
Master Valves/Pump Starts 4 1<br />
Flow Meters 4 3<br />
Pause Devices 7 1<br />
The system supports up to 110 total device loads.<br />
You can configure 200 zones in the <strong>3200</strong> or <strong>3200</strong>R controller. Unused ports or serial numbers on biCoders do not<br />
occupy a zone address and do not count towards the 200 zone limit.<br />
Page 13
Change language